• 1U rack mount hardware raid chassis five drive with USB3.0 and eSATA host connection
• 5x SATA I,II, III drive as hardware raid levels: 0 / 1 / 3 / 5 / 10 / BIG / JBOD / CLONE+Hot Spare
• Very fast: RAID5 transfer rate up to 250MB/sec Read or Write
• Support SATA host with or without Port Multiplier ware
• Easy and FAST RAID set up - with or without Raid GUI utility
• Built-in high performance RAID storage processor, PROM and SRAM for RAID engine
• Supports raid volume with HDD greater than 2.0 Tera Bytes drive (4TB tested)
• Staggered drive spin up - Hard Disk (Activity / Failed) LED chassis function
• Email Notification of system status
• Automatic detect drive to rebuild degraded RAID
• S.M.A.R.T array monitoring for hard drive status and reliability

DATOptic introduces a NEW version RM5_R5L - the first USB3.0 and eSATA a hardware raid port multiplier, most cost-effective, high reliable, high density and fast data transfer rate raid solution. In a 1U rack mount chassis coupling with five SATA featuring DirectAir ^tm technology, RM5_R5L is a must have solution for application that needs FAST, HIGH RELIABLE, and easy to manage storage.

RAID5 As storage capacity requirements getting larger, data storage without drive fault tolerance implement, potential of lost data, down time and lost revenue is greater. As our RM5_R5L RAID5 capable, if a HDD failed and a new HDD is inserted the built-in RAID5 will able to reconstruct the BAD drive so the data is stay intact.

High performance
RM5_R5L provides an unparalleled of high reliable of protect data for users, who demands high transfer rate performance with a fraction of cost.

The RM5_R5L not only provides a high reliable sustained data rate, protected data, but also very fast transfer rate! 5.0Gb bandwidth in USB3.0 The graphs below show how well the RM5_R5L is able to handle a real life scenario.

Machine: Apple Mac Pro
RM5_R5L + eSATA_PCIe8 (JBOD mode)
5x SATA II 7200.10 1.00GB HDD (Seagate AS) configured as RAID5

Machine: Apple Mac Pro
RM5_R5L + eSATA_PCIe8 (JBOD mode)
5x SATA II 7200.10 1.5GB HDD (Seagate AS) configured as RAID5

The RM5_R5L not only provides a high reliable sustained data rate, protected data, but also very fast transfer rate! The graphs below show how well the RM5_R5L is able to handle a real life scenario.

Machine: Window Vista - Duo Core 2.53GHz, 2.0GB DDR2, Vista 32
RM5_R5L + eSATA_PCIe8 (JBOD mode)
5x SATA II 7200.10 1.00GB HDD (Seagate AS) configured as RAID5

DirectAir^tm
With a great thermal issue consideration, uNAS incorporates DirectAir ^tm technology (patent-pending) to all SATA II hard drives in RAID 5 configuration, to insure all the HDD temperature stay with in six (6) to eight (8) degree Celsius from the room ambient, thus increasing the performance and extended hard drive life cycle.

Massive protected storage
Need 80TB of storage space with data protected?   4x RM5_R5L systems combine with out eSATA_PCIX or eSATA_PCIe8 controller a massive, high performance, fully protected storage and unparallel bandwidth 20Gbps can be done with a fraction of cost. Call us to find out more

Easy RAID management
RM5_R5L system RAID management can be access in multiple ways:

• Intuitive dial control
  
• RAID set up and management can be access via Web GUI. This method allows both local and remote control, configured, monitor of RAID status

  
  
  

Monitor and Report
Unlike other RAID system in the market, RM5_R5L fully supports S.M.A.R.T. Self-Monitoring, Analysis, and Reporting Technology. An email Notification can be configure via RAID GUI utility

With little set up our RM5_R5L will able to send email notification to multiple email addresses. Just enter the SMTP, email addresses and notification type then the raid system will send the email accordantly

For OEM or quantity order please contact us