MNAS-44 Update Software instruction;

Please visit our web site for the MNAS-44 softwware download or find it in included CD

A  - New setup  - NAS Discovery Utility shows Zero - Disk

1  - Unzip if need to a folder, in there you should have a file name *AG_NAS_Vx.x.x-generic.cpio.bz2* and Upgrade-4400-Vx.x.x-generic.bz2

2  - Remove all your HDDs

3  - Turn on MNAS without HDD

4  - Run NAS discovery utility,

5  - When NAS show up Insert all the HDD in (hot plug) you may need to refresh and configure

6  - Enter IP address and the web browser, MNAS should return screen with Hardware and Software version

7  - Log in as root

8  - Configure RAID

9 - Click Install button 

10 - Browse to the file in step 2

	Note:	For system Software version 1.60, you must update to 1.7.x, in order to update to 1.8.x

11 - Click install

12 - If you are update from 1.6.0 to 1.7.1, now you can use B instructions ( see below)




B - Existing NAS - System currently in service

1 - Log-in as Administrator 

2 - Select Advanced - Firmware option

3 - If the system shows:

	a - Software version 1.6.0 then you must update to Version 1.7.1, in order to update to 1.8.1

	b - Software version 1.7.x, then update system by using file name:  Upgrade-4400-Vx.x.x-generic.bz2 

If you have questions comment email to Support@DATOptic.com or visit our forum http://www.datoptic.com/cgi-bin/yabb/YaBB.cgi