Each individual bay can be independent power ON or OFF
Near-Line RAID Storage Cluster system supports fifteen (15) Serial ATA Drive, which can be configured
as RAID 1, RAID 0, RAID 5, RAID 5+0, RAID 1+0 or JBOD (con figuration may vary with SATA host controllers)
in a 4U Rack mount chassis with built-in Port Multipliers and eSATA host interface.
The DATOptic RM15_S2P_TL is a FIFTEEN (15) bay 4U rack mount chassis with fifteen (15)
SATA swap-able HDD directly plug-in back plane, which reduces the numbers of interconnections, thus increase
reliability of system. The RM15_S2P_TL is an easy-use and cost- effective fifteen bay of 3.5" SATA
Hot-swap-able hard disk drive storage system. The RM15_S2P_TL (15) fifteen 3.5 in drive rack mount
enclosure can be used as a huge mass storage device, delivering large amounts of data with up to 15.0 Terabyte
of storage space (1.0TB HDD).
Depending on the host controller used, IT personnel can implement either hardware and/or software RAID
configurations. The RM15_S2P_TL 15x SATA HDD rackmount can be configured as JBoD using standard
partitions, mirroring (RAID 1), striping (RAID 0) or any combination of Mirroring and Stripping RAID 1+0 , and
even RAID 50, and can be allocate storage space with multiple systems.
A Massive protection RAID 5 storage of 15.0TB* is possible with RM15_S2P_TL and
RR-2304 using 1.0TB HDD, which offers very fast transfer rate up to 530MB/sec Write and 550MB/sec Read.
TWO 4U rackmount enclosure Thirty (30) 3.5 in SATA driveThe DATOptic RM15_S2P_TL offers a perfect
solutions for large storage libraries, digital video & digital audio files, backups and flexibility to grow with
your storage needs. Over twenty (20) Terabyte can easy achieve with TWO RM15_S2P_TL.
units.
RM15_S2P_TL is ideal for High Definition Non Linear Editing Storage system due to the high speed
and high reliability (RAID 5), or any application required more then 500MB/sec READ/WRITE perfromance as a
protected storage volume.
Assembly in USA