You have no items in your shopping cart.
- Support Dual Drive: Master/Slave mode; ATAPI or ATA-33 to 133
- Support Win98SE, ME, 2K, XP, Linux, FreeBDS, MAC OS 9.x or later
- Free CPU resource by reducing number of IRQ being sent to CPU
- Daisy chain able to 64 devices, no more 4 IDE per MotherBoard
- No HDD size limitation, support mix ATA/ATAPI interface
- Hardware RAID 0 capable: double HDD speed
Introducing an improve version of our famous Dual Drive Internal FireWire Converter, which offers unsurpassed performance yet, simple and easy to use. Our IFC-1P, a IDE direct plug-in device, which converts any up to TWO new or existing ATAPI/ATA devices into IEEE-1394/FireWire daisy chain-able internally with hardware RAID 0 capable.
When converted IDE device to FireWire device with our IFC-1P Internal FireWire Bridge Adapter, your computer will run SMOOTHER, FASTER and BETTER because the IDE drive no longer sends TOO MANY IRQ to CPU, therefore computer system CPU has lots more time to do what it suppose to, due to the bus achitecture tt won't lockup the bus when command is send to the bus.
Application
JBoD - with our Brand New Dual Drive Internal FireWire Converter, your computer system is no longer subject to four IDE devices and IRQ
limitation. Now you can have up to 63 Internal or External IDE devices in the expense of only ONE IRQ.
CD/DVD duplicator
Our FireWire to IDE supports ATAPI-6 therefore you can daisy chain converted IDE to FireWire Optical Drive and burn all of them at the same time or each
drive with different images, some of our customer have configure system that able to burn TEN different DVD title at the same time.
RAID 5
With software RAID you can even built your self a high reliable RAID 5 system with our IFC-1P, for further of how to built RAID 5 please go
here.
Boost the computer performance
Some people has refer FireWire bus as "POOR MAN SCSI" simply it has some intelligent controlling embedded, that is why firewire when operates, it send
much less interrupt requested to CPU compare to ATA or ATAPI (IDE bus), thus CPU does not wasted time and resource for handling IRE issue. Base on this
feature we have some article will show you how to making PC runs faster Part 1
Part 2.
| Part Number | IFC-1P Internal FireWire Converter with 911+ with HW RAID 0 |
| IDE/PATA Peripherals | Any ATA/ATAPI Drive: CD/DVD-ROM/RW/RAM, HDD, Tape Backup, MO, ZIP, JAZ |
| Operating System | Win98SE, ME, 2K, XP, FreeBSD, Linux, MAC 8.6 or higher |
| IDE Interface | ATAPI/ATA-133 |
| IEEE 1394 Interface | IEEE 1394-1995, IEEE 1394a compliant Support data transfer rate up to 100, 200, 400 MBps SBP-2 Target Revision 4 compliant |
| Operating Temperature | 0oC to 50oC |
| Operating Humidity | 5% to 95% non-condensing |
| Dimensions | 7.3cm(L)x4.4cm(W) (3.75inx1.4in) |
| Connectors | 40-pin IDE connector x 2 6-pin IEEE 1394 connector x 2 3-pin power connector x 1 |
| Power Requirement | 5V/DC; 130mA ~ 200mA |
| Manual, Driver, ect... | Manual Improved Performance Part 1 Improved Performance Part 2 |
You may also be interested in the following product(s)
IDE host to Dual drive IDE and SATA bridge
$15.95
|
Parallel ATA to Serial ATA Host Mode Bridge Board featuring JMicron JM20330APC0 Bridge Controller - IDE-SATA20
$14.99
|



