You have no items in your shopping cart.
Details
- Five hot swap-able bay RAID levels: 0 / 1 / 3 / 5 / 10 / JBoD / Clone / Hot spare five tray-less SATA I/II/III drives
- Supports JBoD/RAID function in Thunderbolt and eSATA | USB3.0 | USB2.0 | FireWire800 | FireWire400 as optional
- DirectAir (tm) and touch screen thermal control with over temperature alarm
- Driverless or software installation required, enclosure supports host hot plug
- 1-to-5 SATA II (3.0Gbps) Port Multiplier with a hardware raid engine from embeded high-performance RAID engine, a microprocessor, SRAM, PROM
- Provides RAID Manager GUI Utility to configure and monitor the status of the disks connected on RAID controller
- 48bit LBA fully supports HDD size greater than 2TB - tested with 3TB, 4TB and beyond
- Supports Multiple RAID (Configured as Multiple Volume RAID)
- Rebuild speed: 200GB/hour - 10TB RAID volume about 5 hrs
- S.M.A.R.T array monitoring for hard drive status and reliability
- Made in the USA
A brand new 2014 model hardware RAID/JBoD system tRAID-Ttm offers FIVE (5) tray-less hot-swap bays with direct air cooling technology, and touch screen thermal control, perfect for those demanding a high reliability 24/7 and extremely fast compatible with MAC and Windows.
Our tRAID-Ttm raid/jbod system integrates six high-speed Serial I/O’s, six SATA upper layers, a high-performance RAID engine, a microprocessor, SRAM, PROM, a high efficient data bus and other control logic into tRAID-T raid engine coupling with large whisper fan reside next to to the HDDs, which is controled by the touch screen LCD. In turn allows end users totally control the fan noise if any. It delivers unprecedented performance across multiple platforms: Macintosh, Linux, Windows and Novell at 3.0Gbps transfer bandwidth.
Our tRAID-Ttm comes with Dual Thunderbolt for daisy additional Thunderbolt deceives, so end user can take the advantage of 10Gb/s thunderbolt bus.
DirectAirtm
DirectAirtm forces air directly into hard drives, keeping their temperature close to ambient, often resulting close to 100% of heat dissipation being removed, and keeping the hard drive cool. This not only increases HDD stability, but their efficiency as well. This allows the tRAID-T to be operate 24/7 without worry of thermal run-away over-heating and definitely prolongs the hard drive life expectancy.
Touch Screen Thermal Control
tRAID gives the end user complete control of thermal the enclosure management, incorppatreed with a touch screen thermal control panel, tRAID will monitor and control internal fans with a simple touch to the screen, whether for decrease | increase fan's RPM, or lower the trigger temperature
Support TrueCrypt
For sensitive data, end users can now encrypt entire file volume with our tRAID+TrueCrypt. Our tRAID has been tested with TrueCrypt in Linux, MAC, and Winows. tRAID transfers up 280MB/sec with encrypted files, thanks to embedded IO processor in our controller to minimize usage of host CPU.
To use TrueCrypt in MAC, Windows, and Linux please go to: http://www.truecrypt.org/
Tray-less hot-swap
tRAID is designed minimalist and modularization concept - meaning an upgrade and future improvement is possible - simple replace the newer or better module in the future to give is new breath of life.
Example: replace Thunderbolt version 2.0 module in when it available or update the RAID engine for a better and faster.
PSU Over Ratedtm
Many enclosures fail due the PSU (power supply unit) being too close, not providing much of a buffer or safety net margin. But not with DAT Optic's tRAID-T. We use a hefty 300W PSU to insure the reliability of our enclosure. It is 120% over rated for the total power required by our tRAID-T's total power consumption.
AMAZON customer review:
For OEM or bulk quantity pricing, please contact sales@DATOptic.com.
Customer Reviews
Write Your Own Review
| Part Number | tRAID-T2
Dual Thunderbolt RAID Interface |
tRAID-T1
Single Thunderbolt RAID Interface |
tRAID-eSU3
eSATA | USB3.0 RAID Interface |
| Physical Mount Space | Up to five (5) SATA I/II drives, supports 2.0TB and greater HDDs | ||
| Operating System | Any OS with USB3.0/USB2.0/FireWire and/or eSATA host support Port Multiplier | ||
| Drive Interface | SATA I / II / III up to five (5) drives | ||
| Cooling | Direct Air scheme to prolong HDD life cycle for 24/7 operation | ||
| Operating Temperature | 0 oC to 50 oC | ||
| Operating Humidity | 5% to 95% non-condensing | ||
| Dimensions | 30.5 cm x 22 cm x 23 cm (12" x 8.75" x 9.0") (D x W x H ) | ||
| Connectors | 2x Universal AC Plug 1x Power connector 1x On/Off switch 1x eSATA |
||
| Power Supply | 115-230VAC 50/60Hz; switch-able 320W Output Power | ||
| Weight | 12.0lbs - 5.50Kg | ||
| Manual, Driver, etc | tRAID-T Quick User Guide
RAID GUI User Guide RAID GUI for Windows V09.58 RAID GUI for MAC V0.9.58 RAID GUI for Linux V0.9.58 RAID GUI for Open SUSE 11.1 Linux Daemon Tool - CLI tRAID-eSU3 0960.FW Note: Improved USB3.0 connectivity tRAID-T1 and tRAID-T2 V.0957 |









