You have no items in your shopping cart.
- Support Dual (2) SATA I, II, and III port hardware RAID controller, no drivers required
- OS independent Hardware RAID with email notification
- Supports RAID levels: 0 / 1 / SPAN and JBoD (Port Multiplier) - driers-less
- RAID Manager GUI Utility to configure and monitor the status of the disks connected on RAID controller in MAC, Windows and Linux
- Supports HDD greater than 2TB due tp 48bit LBA - address-able up to 64TB per port
- Fast eSATA 6Gb/s and USB3.0 5Gb/s (compatible USB2.0) host connection regardless of operating system
- Better bandwidth compare to PCIe V2 dual port - 6Gb vs 5Gb
- External RAID solution
eS6U3-DS3R uses market-proven Multi-port Serial ATA PHY technology and a proprietary storage processor to provide very highly efficient, stand alone SATA RAID operations - driver less, no software installation required.
With selected dip switch setting, eS6U3-DS3R can function as a pure port multiplier - Just a Bunch of Drive (JBoD*) - which provides TWO individual SATA drives expansion just like a SATA Hub, or a hardware RAID controller with performance booster at 6Gb/ or 5Gb USB3.0 and requires NO Driver to load. Fully support MAC, Windows, Linux, UNIX, FreeBSD...You can configure TWO drives as RAID0, RAID1, BIG (SPAN).
eS6U3-DS3R has a self-contained storage processor chip which completely frees up the host system CPU loading and whose SATA ports comply with SATA II specification, making it suitable for use in both internal systems and external storage applications where no technical knowledge is required.
To use RAID GUI - download able on Support tab of this page - you need to set SW#1 to OFF. Otherwise It controls by switches.
Meaning set the dip switches as desire RAID, press and hold SET switch with paper clip or ball pen, turn on power the controller will create raid volume
With dual host eSATA and USB3.0, ourU3eS-RM controller can be easily integrated into a external storage box capable of hot plug to high speed host like eSATA and USB3.0 (5.0Gbps) which supports HDD greater than 2.0TB.
It is a better solution for a typical PCIe dual port RAID. It has a 6Gb bandwidth compare to 5Gb PCIe (V2) 1 lanes, it's a driver-less vs drivers needed of PCIe
For OEM or bulk quantity pricing, please contact sales@DATOptic.com.
* Requires Port Multiplier Host like our eSATA card.
Write Your Own Review
eSATA III (6Gb) / USB3.0 (5Gb) to two (2) SATA III port JBoD/Hardware RAID0/1/SPAN/BIG Controller
|Peripherals||Up to TWO (2) SATA (Serial ATA) III drives
Fully support all size HDD including 3 / 4/ 6/ and 8TB
48 bit LBA address - capable access up to 64TB per SATA port
|Operating System||Any OS with an eSATA 3Gb/6Gb or USB3.0 / USB2.0 port - No driver required|
|Device Interface||SATA I, SATA II, SATA III, SSD|
|Host Interface||eSATA 3Gb/s 6Gb/s and USB3.0 / USB2.0 port|
|Operating Temperature||0oC to 50oC|
|Operating Humidity||5% to 95% non-condensing|
|Dimensions||61.5(D) x 21.6(H) x 83.3(W)mm
Mount-able in SCSI cut out
|Connectors||eSATA connector x 1 (device)
USB3.0/2.0 connector x 1 (device)
SATA connector x 4 (host)
4-pin floppy power connector x 1
|Power Requirement||5V/DC; 250ma ~ 500mA|
|Manual, Driver, etc|| eS6U3-DS3R - Quick User Guide
eS6U3-DS3R RAID GUI for Window
eS6U3-DS3R RAID GUI for Mac