Firewire to ATA / ATAPI Internal Converter (Patented)

  • Convert ATAPI/ATA device into Firewire device internally
  • Support Win98SE, ME, 2K, XP, Linux, FreeBSD and MAC OS 8.6 or higher.
  • 100, 200, 400 Mbps Firewire transfer rate
  • Very Low CPU Usage with ATAPI device
  • Only One (1) IRQ for 63 IDE devices (daisy chain)
  • Support ATA-133 interface HDD with up to 4000GB space
  • User Manual: How to install, trouble-shoot
  • More Infor in PDF Format


    • As a commitment to provide customers the best technology and cost effective solutions, our engineer team at DAT Optic Inc has designed an adapter to convert the new or existing IDE devices to IEEE-1394 / FireWire internally. The process of converting can be done within 1 minutes, but the result is far better than most end user would expected.

    When using the converted IDE device to FireWire device with our Internal FireWire Bridge Adapter, your computer perfrom all of these tasks simultanous:
    - Burn CD, burn DVD, ripping movie, play GAME and listen to MP3.

    With our Internal FireWire Convert your computer now can run lots more efficent, handle multi-task smoother. In addition, with our Internal FireWire Bridge Adapter computer system is no longer subject to four IDE devices and IRQ limitation. Now you can have up to 63 Internal or External IDE devices with only ONE IRQ.

    Padus, creators of DiscJuggler®
    They work wonderfully. We were able to burn at 24x [with BurnProof disabled] to all drives with one task using the same image on one harddrive, and burn 4 different tasks, one task per burner, ...

    Adolphus F. McLain - CD/DVD Duplicator Systems Integrator
    Absolute Incredible !!!

    Tim Pattinson - New Zealand Date: 8/15/02
    The cards have been found and installed in my tower system, and as promised, they work superbly well. I am so impressed that I will be putting in an order for some more in the near future..

    P/N: FWInt133: Internal FireWire Convertor supports up to 4TeraBytes ATA-133 HDD
    P/N: FWInt100: IDE to FireWire bridge board supports up to 120GB ATA-100 HDD

    Specification

    Operating Temperature: 0 C to 50 C
    Operating Humidity: 5% to 95% non-condensing
    Dimension: 7.3(L)cm x 4.4 (W)cm
    IDE peripherals: CD-ROM, CD-R, CD-RW, DVD-ROM,
    DVD-RAM, Hard Disk, MO Drive,
    Jaz, Zip, Tape Back-up.
    Operating System: Win98SE, ME, Win 2000, MAC 8.6 or higher
    IDE Interface: ATAPI/ATA-66. P/N: FWINT-66
    ATAPI/ATA-100. P/N: FWINT-100
    IEEE 1394 Interface: IEEE 1394-1995, IEEE 1394a compliant. Support data
    transfer rate up to 100, 200, 400 MBps. SBP-2 Target
    Revision 4 compliant.
    Connectors: 40-pin IDE connector x 1
    6-pin IEEE 1394 connector x 2
    4-pin power connector x 1
    Power Requirement:
    		 5V/ DC ; 130mA ~ 200mA