Check items to add to the cart or select all
- Quiet, external RAID5 five SATAI,II,III drives with eSATA and USB3.0/2.0 host connection - NEW
- Raid stand-by from 00:01 to 03:00 time-out to save energy and increase MTBF NEW feature
- No driver need for MAC, Windows, Linux, hot plug capable
- 5x SATAI,II, III drive as raid levels: 0 / 1 / 3 / 5 / 10 / JBOD /BIG(SPAN) CLONE
- Very fast: RAID five up to 250MB/sec Read or Write
- Support
SATAUSB3.0/USB2.0/SATA/eSATA - NEW - host with or without Port Multiplier ware - Raid GUI support MAC, Windows and Linux or/and LCD display for easy control and manage
- Built-in high performance RAID storage processor, PROM and SRAM for RAID engine
- Supports HHD greater than 2.0 TB drive
- Staggered drive spin up - Hard Disk (Activity / Failed) LED chassis function
- Email Notification of system, HDD S.M.A.R.T status
- Automatic detect drive to rebuild degraded RAID
- S.M.A.R.T array monitoring for hard drive status and reliability
DATOptic introduces the first hardware raid port multiplier offering a cost-effective, high reliable and fast data transfer rate raid5 solution. In a quiet over-kill 400W power supply tower coupling five SATAI,II, III tray-less bays featuring DirectAir tm technology. eBOX-R5 is a must have solution for application that needs FAST, HIGH RELIABLE, SILENT and easy to manage storage.
As storage capacity requirements getting larger, using data storage without drive fault tolerance implemented, potential of lost data, down time and lost revenue is greater. As our eBOX-R5 hardware RAID5 capable, if a HDD failed and a new HDD is inserted the built-in RAID engine will able to reconstruct the BAD drive so the data is stay intact.
Support TrueCrypt
For sensitive data, now end user can encrypted their files entire volume with our eBOX-R5+TrueCrypt. Our eBOX-R5 has been tested with TrueCrypt in Linux, MAC and Winows, eBOX-R5 transfers over 200MB/sec with encrypted files, thanks to embedded IO processor in our controller to minimized usage of host CPU.
To use TrueCrypt in MAC. Windows and Linux please go here
High performance and easy to use
eBOX-R5 provides an unparalleled of high reliable and ease of use of protected data for users, who demands high transfer rate performance with a fraction of cost and no technical jargon.
The screen capture images below show how well the eBOX-R5 is able to handle a real life scenario.
Machine: Apple Mac Pro
eBOX-R5 + eSATA_PCIe8 (JBOD mode)
5x SATA II 7200.10 1.00GB HDD (Seagate AS) configured as RAID5
Machine: Apple Mac Pro
eBOX-R5 + eSATA_PCIe8 (JBOD mode)
5x SATA II 7200.10 1.5GB HDD (Seagate AS) configured as RAID5
Here is the test result in Windows enviroment.
Machine: Window Vista - Duo Core 2.53GHz, 2.0GB DDR2, Vista 32
eBOX-R5 + eSATA_PCIe8 (JBOD mode)
5x SATA II 7200.10 1.00GB HDD (Seagate AS) configured as RAID5
Easy RAID management
eBOX-R5 system RAID management can be access in multiple ways:
- Intuitive LCD controller panel

- RAID set up and management can be access via Web GUI. This method allows both local and remote control, configured, monitor of RAID status

Monitor and Report
Unlike other RAID system in the market, eBOX-R5 fully supports email notification and S.M.A.R.T. Self-Monitoring, Analysis, and Reporting Technology.
Here is the report of a HDD base on S.M.A.R.T these feature also can be access with the use of its LCD display
With RAID GUI, end user can specify an event, a warning, or a notify being sent via specific email. Here is email configure screen
DirectAir tm
DirectAir tm forcing air direct into hard drive keep their temperature close to ambient, often resulting removing close to 100% heat dissipation. By keeping the hard drive cool, HDDs are not only increase stability, prolong HDD life, but the efficiency also.
Designed for the Studio,and Office Office
Ultra-quiet - DirecAir tm technology remove lots more efficence then conventional convection, therefore the fan does not does not have to spin in high rpm, it makes the eBOX-R5 is a choice for editing and recording video/audio studios who can not allow the addition of any noise within the critical of creative listening environment.
Tray-less = save time and money
With the new patent connector, end users can use the hard disk just like currently compact disc or floppy disk being used, there is no tool nor hard drive tray required, just the hard drive itself. It saves time, money and prolong SATA HDD due NO SCRATCH connection.
Click Next to see Patterned New and Improved SATA connection.
| Part Number | eBOX-R5 - 5x SATA I/II Hadrware RAID5 Enclosure with eSATA and USB3.0/2.0 Interface |
| Physical Mount Space | Up to five (5) SATA I/II/III drives - support HDD greater than 2TB |
| Operating System | Any OS with USB2.0, USB3.0, SATA and eSATA |
| RAID Features | Support JBoD and Raid function.
- RAID level: 0,1,3,5,10, big (span), clone |
| Drive Interface | SATA I, II, III up to five (5) drives |
| Cooling and Fan Noise | Direct Air scheme with Temperature Sensing and email notifying allowing 24/7 operation
Fan noise typical 20dBA |
| Operating Temperature | 0 oC to 50 oC |
| Operating Humidity | 5% to 95% non-condensing |
| Dimensions | (H X W X D)30.5cm x 19.0 cm x 41.9cm (12" x 7.5" x 16.5") |
| Connectors | Universal AC Plug x2 Power connector x1 On/Off switch x1 eSATA x1 |
| Power Supply | 115-230VAC 50/60Hz; switch-able 320W Output Power |
| Weight | 16.0lbs - 7.25Kg |
| Content | • 1x eBOX-R5 enclosure
• 1x eSATA PCI bracket - to use the internal SATA host • 1x Set of tray lock keys • 1x2.0m eSATA cable • 1x AC power cable • 1x Manual, drivers and Raid Utility CD |
You may also be interested in the following product(s)






