Want to convert a 10000rpm Serial ATA HDD to IDE interface or just any SATA drive? Our IDE-SATA20 is a perfect adapter for the job! Attaches our IDE-SATA20 to the back of all types of Serial ATA Devices (such as Hard Disk, DVD, DVD-RAM, CD-ROM, CD-RW, MO, ect ...) now and make them become IDE Device to work with IDE host Controller.

Our IDE-SATA20 is a converter solution for the Serial ATA Device to IDE (PATA) which can be ATA or ATAPI device. It has a standard 22 pin SATA port which can interface to a Serial ATA device (hard disk, cdrom, DVD, CD-RW, etc). It accepts Parallel ATA (IDE) commands through the 40 pin IDE connector from the host, decodes the commands and converts them to a Serial ATA commands to the device. Response from the device through the SATA bus are deciphered, processed and converted to a parallel ATA protocol and sent to the host.

The SATA-SATA4 bridge board supports the Serial ATA Generation 1 transfer rate of 1.5 gb/s (150 MB/s) on the serial ATA side and is compatible with Ultra ATA-133 on the parallel ATA side.

If you are interesting to OEM this product please contact sales@DATOptic.com

Part Number	IDE-SATA20 Parallel ATA to Serial ATA Host Bridge Board featuring JMicron JM20330APC0 Serial ATA bridge Controller
IDE Peripherals	Compliant ATA33 to 133 and ATAPI interface
Operating System	Transparency to OS
SATA interface	SATA version I - 1.5Gbps
Connection	Direct connection to Serial ATA
Operating Temperature	0o C to 50o C
Operating Humidity	5% to 95% non-condensing
Dimensions	3.97" x 1.00" (10.09cm x 2.54cm)
Connectors	Serial ATA connector x 1 40pin IDE connector x 1 Molex Power connector 1x
Connectors	eSATA Multilane/Infiniband x 2 Power connector x 1 On/Off switch x 1
Power Requirement	5V/DC; 130mA ~ 200mA
Package contents: • 1x IDE-SATA20 Bridge Board • 1x AC power cable

Document:

IDE-SATA20 Over View

IDE-SATA20 - RoHS report