You have no items in your shopping cart.
iMirror525A - Key Features
- 2x SATA drive as raid levels: 0 / 1 / JBOD / Large.
- Rotary dial and LEDs for easy control and manage
- Supports SSD
- Built-in high performance RAID storage processor, PROM and SRAM for RAID engine
- Supports raid volume greater than 2.0 Tera Bytes drive
- Up to 3.0Gbps transfer rate (eSATA) with fast rebuilt raid engine
iMirror525A delivers the performance and data protection capabilities required for workstations and high-end desktops.
With the high-speed transfer rate at 3.0 Gbs (300MB/s) provided by SATA II, iMirror525A truly offers the unmatchable I/O performance to its users.
| Part Number | IMIRROR525A - Dual SATA RAID Storage for two SATA Devices |
| Peripherals | Two (2) SATA (Serial ATA) drive |
| Operating System | Windows, Linux and MAC - no driver needed |
| Interface | SATAI; SATA II |
| Host Interface | SATA or eSATA 3.0Gbps |
| RAID Level | Large (Big drive) RAID 0 (Stripping) RAID 1 (Mirroring) Port Multiplier |
| Status LEDs | Power, RAID Status LEDs SATA Link & Activity, Error Indicator LEDs |
| RAID Configuration | RAID Mode Rotary Switch Change Mode Button |
| Alarm Buzzer | Buzzer for RAID error alarm |
| Storage Type | 2.5” and/or 3.5" SATA SSD/HDDs |
| Operating Humidity | 5% to 95% non-condensing |
| Operating Temperature | 0o C to 50o C |
| Form Factor | 5.25” ODD (Optical Disk Drive) form factor |
| Dimensions | 146.6(W) x 42(H) x 120(D) mm |
| Connectors | SATA connector x 2 (hard drive) SATA connector x 1 (host) 4-pin floppy power connector x 1 |
| DC Power | Mini 4-pin Floppy Disk Drive like power Connector |
| Manual, Driver, ect... | Installation Guide | Windows GUI | MAC GUI |
