You have no items in your shopping cart.
S2-ATAPI Key Features
- Supports all slim CD/DVD/BD drive - Standard ATAPI device
- Serial ATA Generation 2 transfer rate of 3.0 Gbp/s
- SATA Latch Type Connector direct connect
S2-ATAPI is an USB 2.0 to SATA bridge board with direct connect solution allowing converting standard slim device port and a SATA 1.5Gb/s host port easily to convert SATA drive to USB2.0 device. It receives standard Mass Storage Device Class (MSDC) SCSI commands from the USB host and translate them into ATA/ATAPI commands to the SATA device. The maximum throughput can goes up to 30MB/sec.
U2-SATA13 supports USB host controller in UHCI, OHCI, EHCI modes. It means your SATAI device now can be hot plug, hot swap and operates at transfer rate up to 480Mbps
For OEM opportunity please contact us
| Part Number | SU2-ATAPI3 - Direct connect USB 2.0 to Slim ATAPI drive bridge /adapter |
| Drive Port | Slim ATAPI type connector |
| Form Factor | SCSI cut out mountable |
| Host connection ports | USB2.0 |
| Operating System | Any OS support USB bus |
| Operating Temperature | 0o C to 50o C |
| Operating Humidity | 5% to 95% non-condensing |
| Dimensions | 10.15cm x 1.27cm (4" x 0.49") |
| Connectors | 1x Fine-pitch 50-pin connector for slim CD/DVD drive.
1x USB2.0 |
| Power Requirement | USB bus power - no external source required |
| Manual, Driver, ect... | S2-ATAPI Overiew |

