You have no items in your shopping cart.
USB2-IC2 - Key Features
- Complies with the USB-IF specifications for USB 2.0, the USB Mass Storage Class, and the USB Mass Storage Class Bulk-Only Transport
- Operates at High (480Mbps) or Full (12Mbps) speed.Uses one external serial EEPROM containing the USB device serial number, vendor and product identification data, and device configuration data
- Support for ATA/ATAPI devices configured either as master or slave ATA/ATAPI Interface Supports:
- Complies with T13's ATA/ATAPI-6 Draft Specification:
- PIO Mode 0, 3, 4
- Ultra DMA Mode 2, 4
- Supports 48-bit addressing for large hard drives (>128GB)
- It translates ATAPI SFF-8070i commands to ATA commands for seamless integration of ATA devices with generic Mass Storage Class BOT drivers - Self Powered Mode Of Operation
USB2-IC2 (SCSI I 50pin Connector Form Factor Vertical Type) is aUSB 2.0 to EIDE bridge board featuring Cypress CY7C68300-56PVC (USB 2.0 to ATA/ATAPI Native Bridge Controller).
IDE (ATA/ATAPI) Interface: With 6" Length IDC 2X20 Flat Cable
USB 2.0 Interface: One USB B-type-4pin Connector
USB2-IC2 implements a fixed function bridge between one USB port and one ATA or ATAPI based mass storage device port. This bridge adheres to the Mass Storage Class Bulk-Only Transport specification and is intended for self-powered devices.
The USB port of the USB2-IC2 is connected to a host computer directly or via the downstream port of a USB hub. Host software issues commands and data to the USB2-IC2 and receives status and data from the USB2-IC2 using standard USB protocol.
The ATA/ATAPI port of the USB2-IC2 is connected to a mass storage device. A 4Kbyte buffer maximizes ATA/ATAPI data transfer rates by minimizing losses due to device seek times.
The ATA interface supports ATA PIO modes 0, 3, and 4, and Ultra DMA modes 2 and 4. The device initialization process is configurable, enabling the USB2-IC2 to initialize ATA/ATAPI devices without software intervention.
To turn your SCSI enclosure into USB 2.0 Enclose. This allows peripheral vendors a unique opportunity to continue the advantage of the ATA/ATAPI economies of scale while presenting USB2-IC2 into the rapidly expanding USB 2.0 markets, and to replace the slow & expensive SCSI device with cheap & fast EIDE device. SCSI Enclosure vendors using ATA/ATAPI devices now have an immediate and no-risk solution to add USB 2.0 interface to their product lines.
If you are interesting to OEM this product please contact sales@DATOptic.com
| Part Number | USB2-IC2 - USB 2.0 to IDE (ATA/ATAPI) Bridge Board featuring Cypress CY7C68300-56PVC Bridge Controller |
| Operating Temperature | 0o C to 50o C |
| Operating Humidity | 5% to 95% non-condensing |
| Dimension | 6.40cm x 3.70cm x 2.87cm |
| IDE peripherals | ATA/ATAPI device: CD/DVD-ROM/RW/RAM,+RW,+R, HDD |
| Requirement | USB2.0 specification Host adapter |
| Connectors | 40 Pin IDE connector x 1
4-pin power connector x 1 (power cable included) USB2.0 connector (USB2.0 cable included) |
| More detail spec | No Driver required |
