You have no items in your shopping cart.
USB2-3S Key Features
- USB 2.0 interface: one USB B-type connector
- USB bus transfer rate: high speed (480 Mbit) or full speed (12 Mbit)
- USB bus power: self-powered mode operation
- Complies with ATA/ATAPI-6 specification
· DMA mode 0 ~ 2
· Ultra DMA mode 2, 3, 4 and 5 - USB2-3S could be programed with the following three firmware to support different applications.
It is ideally suitable for tailgating removable-media devices such as CD-ROM, CD-R, CD-RW, DVD-ROM, DVD-RAM, Blu ray , and hard disk drive. It allows TWO (2) IDE drives (master and slave) to be connected to USB 2.0 serial bus.
Both ATA and ATAPI devices are supported with the same firmware.
Use ATA/ATAPI drives as boot-able USB2.0 with our internal USB cable, there is no driver or software required, just plug and play. Fully support Windows, MAC, Linux and FreeBSD OS
For more info of OEM opportunity please contact us
| Part Number | USB2-3S - USB 2.0 to Dual drive ATA/ATAPI Bridge Board |
| Drive Port | 40pin ATAPI type connector |
| Chip set | Initio 1510L |
| Form Factor | SCSI cut out mountable |
| Host connection ports | USB2.0 |
| Operating System | Windows XP and later, All Mac OS. Linux, FreeBSD |
| Operating Temperature | 0o C to 50o C |
| Operating Humidity | 5% to 95% non-condensing |
| Dimensions | 83.3mm x 33.85mm x 28.2mm |
| Connectors | 1x 40 Pin IDE/PATA 1x USB2.0 |
| Power Requirement | 5V and 12VDC with Floppy connector |
| Manual, Driver, ect... | USB2-3S Overview |
