You have no items in your shopping cart.
U3-SATA3-RO - Key Features
- Supports USB Super-Speed/High-Speed/Full-Speed - 5.0Gb/480Mb/12Mb/s respectively
- Bus power bridge there is no extra power input require
- Support over 2.0TB volume capacity - 3TB HDD tested
- Panel mount fit to SCSI cut out
- Feature Read only mode - Write-block
U3-SATA3-RO is an USB3.0 to SATA III (6Gb/s - SATAI/II compatible) Bridge Board that allows end user to convert ANY SATA drive such as: SSD, DVD, DVD-RAM, MO, CD-ROM, CD-RW, Hard disk to a (SuperSpeed 5.0Gb) USB3.0 (USB2.0/1.1 compatible).
U3-SATA3-RO translates the communication protocol between SATA III (6Gb/s - SATAI/II compatible) and SuperSpeed USB commands. Fully compliant with USB3.0 Specification Rev 1.0 and USB Mass Storage Class Bulk-Only Transport Specification.
U3-SATA3-RO provides the perfect solution for data backup and transferring of data between computers using SATA drives, raid volume, BD, DVD
U3-SATA3-RO and SPM39x hardware raid controller, system integrator can build a high performance USB3.0 hardware raid system
For OEM opportunity please contact us
| Part Number | |
| Peripherals | One SATA host connection drive
Fully support all size SATA HDD including 1.0TB, 1.5TB, 2.0 and 3.0TB |
| Operating System | Support any OS support USB drive - Driverless |
| Drive Interface | SATAI; SATA II, SATAIII |
| Host Interface | USB3.0 fully compatible USB2.0, USB1.1/1.0 |
| Operating Temperature | 0o C to 50o C |
| Operating Humidity | 5% to 95% non-condensing |
| Dimensions | 61.5(D) x 21.6(H) x 83.3(W)mm Mount-able in SCSI cut out |
| Connectors | USB3.0 connector x 1 (device) SATA connector x 1 (host) Bus powered |
| Power Requirement | 5V/DC; 80ma ~ 200mA |
| Manual, Driver, ect... | USB3.0 to SATA Overview USB3.0 Turbo driver - Windows USB3.0 to SATA Support Community |
