
2x2 E-SATA (6Gb) Ports PCIe V2 X2 Lanes (10Gb) Controller 88SE9230
ES3-PCIe22 is a single-chip PCI Express V2.0 dual lanes (2x), equivalent to 10Gbps bandwidth to four (4) independent 6Gb/s SATA III ports host controller, support (1) Port Multiplier technology bridge*. Fully supports MAC OS 10.6.x to 10.11.x, Windows and Linux with native AHCI protocol.
Only ONE 4x port PM bridge can be used at a time
eS3-PCIe22 - Key Features
- 2x eSATA and 2x SATA (6Gbps) ports in PCIe Gen2 x2 lanes Host Adapter (10Gb/s)
- Supports PCIe 1.0 and PCIe 2.0 motherboard
- Compliant with AHCI 1.3 Rev specification
- Fully compliant with Serial ATA specifications 3.0
- Supports SATA III transfer rate of 6.0Gbps, 3.0Gbps, 1.5Gbps
- Supports SATA I, SATA II, SATA III HDD, SSD, Optical Drive, and Blu-ray Drives
- Supports ATA and ATAPI commands
- Supports Native Command Queuing (NCQ)
- Low Profile PCIe form factor
- Regular size PCIe bracket on board and low profile bracket included
- SATA Hot-plug capability
- Support 64bit / 32bit Windows 8, Win7, Vista, 2008, 2012, Linux - natively
- Support MAC 10.6.x ~ 10.11.x - natively
- Supports Windows XP driver
- Fully RoHS compliant
Using up to dual lane, PCI-Express Gen 2.0 (Gen 1.0 compatible) controller offers a total of 10Gbps bandwidth, a new bandwidth level of JBoD/RAID** for SATA III.
With four SATA ports - a low profile bracket included - Using build-in AHCI protocol in MAC, Windows and Linux OS, our eS3-PCIe22 is truly a plug and play host adapter to expand host data storage.
RAID Function (Windows only)
- RAID 0-Striping (Stripe Size: 32K, 64K)
- RAID 1-Disk Mirroring
- RAID 10-Stripe of Mirrors (Stripe Size: 32K, 64K)
- HyperDuo Safe (Mirrored Protection) or Capacity-Cost (Optimized)
For OEM or bulk quantity pricing, please contact sales@DATOptic.com.
Drivers | MAC OS 10.8.x - 10.11.x Driver-less Windows7 and later - Driver-less Enhance AHCI 1.3 for Windows OS |
User Guide | 4S3-PCIe22-User Guide |
Part Number | eS3-PCIe22 |
Operation Mode | AHCI 1.3 Rev Support MAC; Windows, and Linux as driver -less host |
Host Interface | Two lanes PCI Express (PCIe) Gen 2 @ 10Gbps |
Device Interface | Dual port eSATA / SATA configurable @ 6Gb/s per channel |
Speed | Up to 500MB/sec |
Operating Environment | Temperature: 0o C to 50o C Humidity: 5% to 95% non-condensing |
Support OS | Any OS support AHCI |