
eSATA Hardware RAID 0/1/5/10/CLONE and Hots-pare SATA Port Multiplier Controller with JMicron
SPM393-SI is a five (5) SATA port RAID Controller. It is designed to provide stand-alone RAID 0/1/5/10 array feature cold and hot spare, independent from OS host with data protection and performance aggregation in various applications.
SPM393-SI - Key Features
- Five (5) SATA II port hardware RAID bridge, no drivers required
- OS independent Hardware RAID with email notification
- Supports RAID levels: 0 / 1 / 3 / 5 / 10 / JBoD / Clone
- Provides RAID Manager GUI Utility to configure and monitor the status of the disks connected on RAID controller
- Supports Hot Spare on RAID
- Currently there is no limitation on HDD, due to 48bit LBA (addressable up to 64TB per port)
- Supports Multiple RAID (Configured as Multiple Volume RAID)
- Rebuild speed: 200GB/hour
SPM393-SI uses market-proven Multi-port Serial ATA PHY technology and a proprietary storage processor to provide very highly efficient SATA RAID operations.
With an easy configuration scheme, the device can function as a pure port multiplier which provides SATA port expansion just like a SATA Hub, a hard drive performance booster which provides a high-performance device seen by the host controller, or a hard drive data protector which automatically backs up data to prevent data loss from hard drive damage.
SPM393-SI also has an advanced mode to provide both the benefits of performance boost and data protection.
SPM393-SI has a self-contained storage processor chip which completely frees up the main CPU loading and whose SATA ports comply with SATA II specification, making it suitable for use in both internal system and external storage applications.
For OEM or bulk quantity pricing, please contact sales@DATOptic.com
Part Number | SPM393 Five SATA port Hardware RAID5 Controller |
Peripherals | Up to Five (5) SATA (Serial ATA) drive Fully support all size HDD = 48bit LBA fully supports HDD - Accessible to HDD as large as 64TB |
Operating System | Any OS with an SATA port - No driver required |
Drive Interface | Compatible with SATAI, SATA II and SATA III |
Host Interface | SATA or eSATA 3.0Gbps |
Operating Temperature | 0o C to 50o C |
Operating Humidity | 5% to 95% non-condensing |
Dimensions | 61.5(D) x 21.6(H) x 83.3(W)mm Mount-able in SCSI cut out |
Connectors | eSATA connector x 1 (device) SATA connector x 5 (host) 4-pin floppy power connector x 1 |
Power Requirement | 5V/DC; 250ma ~ 500mA |
Package Contents | SPM393 Board |
FAQ Q How do I update the firmware of eS3-PCIe12-U A Here are the steps to update the firmware 1 - Create a Boot USB with this utility https://github.com/downloads/pbatard/rufus/rufus.exe 2 - Unzip and Copy the attache file to the newly create USB pen 3 - Boot from it 4 - At the prompt enter AHCI.. It should update the card with correct firmware. (951)
|