Dual E-SATA 6Gb/S PCIe V2 Support PM In MAC/Windows/Linux
Our eS3-PCIe12-U is the first Dual ports e-SATAIII (6Gb/s) configurable host controller that supports up to 10x drives SATA III (6Gb) thru Port Multiplier technology.
Our eS3-PCIe12-Fully supports MAC OS" 10.6.x to 10.11.x, Windows and Linux with its native AHCI protocol.
eS3-PCIe12-U - Key Features
- 6Gbps SATA III dual ports PCIe Gen2 1x Lane Host Adapter
- Dual eSATA / SATA 6Gb/s configurable interface
- Supports PCIe 1.0 and PCIe 2.0 motherboard
- Compliant with AHCI 1.3 Rev specification
- Fully compliant with Serial ATA specifications 3.0
- Supports SATA III transfer rate of 6.0Gbps, 3.0Gbps, 1.5Gbps
- Supports SATA I & SATA II & SATA III HDD, SSD, Optical Drive, and Blu-ray Drives
- Supports ATA and ATAPI commands
- Supports Native Command Queuing (NCQ)
- Supports TWO Port Multiplier bridge up to five drives per port
- Supports max one SATA FIS-based or Command-based Port Multiplier
- Low Profile PCIe form factor
- Regular size PCIe bracket on board and low profile bracket included
- SATA Hot-plug capability
- Supports 64bit / 32bit Windows 8, Win7, Vista, 2008, 2012, Linux - natively
- Supports MAC 10.6.x to 10.11.x - natively
- Supports Windows XP driver
- Fully RoHS compliant
Using up to single lane PCI-Express Gen 2.0 (Gen 1.0 compatible), the controller offers a 5Gbps bandwidth, a new bandwidth level of JBoD/RAID for SATA III.
With two SATA/eSTAA ports configure-able, a low profile included a bracket, support Port Multiplier, using built-in AHCI protocol in MAC, Windows and Linux OS, our eS3-PCIe12-U is a perfect host adapter to expand host data storage.
| Driver, Firmware, Manual - 0.951 Firmware - Port Multiplier Driver for Windows - for Window 8.x/10/2012 - eS3-PCIe12-U-User Guide |
| Part Number | eS3-PCIe12-U |
| Operation Mode | AHCI 1.3 Rev Support MAC; Windows, and Linux as driver-less host |
| Host Interface | Single lanes PCI Express (PCIe) Gen 2 @ 5Gbps |
| Device Interface | Dual port eSATA / SATA configurable @ 6Gb/s per channel fully support ONE PM ware (port multiplier) |
| Speed | Dual SSD RAID0 Read/Wire over 500MB/sec |
| Operating Environment | Temperature: 0o C to 50o C Humidity: 5% to 95% non-condensing |
| Support OS | Any OS support AHCI |
| FAQ Q How do I update the firmware of eS3-PCIe12-U A Here are the steps to update the firmware 1 - Create a Boot USB with this utility https://github.com/downloads/pbatard/rufus/rufus.exe 2 - Unzip and Copy the attache file to the newly create USB pen 3 - Boot from it 4 - At the prompt enter AHCI.. It should update the card with correct firmware. (951)
|
