Dual IDE/PATA To FireWire800 Internal Converter With Oxford 912 Chipset

Dual IDE/PATA To FireWire800 Internal Converter With Oxford 912 Chipset

Internal FireWire Converter With 911+ With HW RAID 0

Internal FireWire Converter With 911+ With HW RAID 0

Dual IDE/PATA To FireWire800 Internal Converter With Initio Chipset

Dual IDE/PATA To FireWire800 Internal Converter With Initio Chipset

Dual IDE/PATA To FireWire800 Internal Converter With Oxford 912 Chipset

DAT Optic's famous Dual Drive Internal FireWire800 Converter with the Oxford 912 chipset.

$28.00
Availability: In stock
SKU
IF8C-912

IF8C-912 - Key Features

  • Control TWO ATA/ATAPI devise as MASTER and SLAVE
  • Supports Striping and Spanning
  • Improves computer performance
  • Only One (1) IRQ for 63 IDE devices (daisy chain)
  • Convert TWO IDE devices to RAID 0 Firewire RAID devices
  • Support ATA-7 up to UDMA6
  • 4096 bytes - 1394 payload
  • Ideal for video editing applications
  • Create high-speed DVD duplicator
  • Up to 800 Mbps (100MB/sec) transfer rate
  • 48bit LBA support for the large drive
  • Support Win98SE, ME, 2K, XP, Linux, FreeBSD, and MAC OS 9.x or higher

Introducing our brand new Hardware RAID 0 Dual Drive FireWire 800 Internal Converter, which offers unparalleled performance, flexible yet very simple and easy to use.

Our IF8C-X's core design is based on Oxford-912, which combines a 32bit RISC processor, an operational block coprocessor and high-performance buffer management. The FIFO has a RAM bandwidth of 1600Mbps. It stores 1394 packets passing them to appropriate destinations without processor intervention and with ORB coprocessor managing the sequence for ORB fetching, reduced latency and improved data throughput resulting in the support of more than 88MB/sec data rates.

DATOptic's IF8C-R can be a direct plug-in to TWO new or existing ATA-133 HDD drives and convert them into a single HDD with double transfer data speed, perfect for video editing.

Or connect TWO DVD-Rs and burn DVDs at 16x speed at the same time with our IF8C-912 converter.

With our Brand New Dual Drive Internal FireWire 800 Converter, system CPU will experience less interrupt request being sent from using/accessing ATA/ATAPI devices, therefore computer system can run better, smoother, and a lot more efficiently.

Computer systems with our Internal Converters are no longer limited to four drives. In fact, 63 Internal or External IDE (converted) devices can be connected to FireWire bus in the expense of only ONE IRQ.

RAID and Dual Drive can be changed via firmware setting. For the convenience of "ready to use" order one of the following preprogrammed version of our converter:

IF8C-R RAID 0 function
IF8C-912 Dual Drive function
Write Your Own Review
You're reviewing:Dual IDE/PATA To FireWire800 Internal Converter With Oxford 912 Chipset
Your Rating
Part Number IF8C-912 
Dual Drive FireWire 800 Internal Converter - Oxford Chipset 912
IDE/PATA Peripherals Any TWO ATA/ATAPI: CD/DVD-ROM/R/RW/RAM, HDD
Operating System Win98SE, ME, 2K, XP, FreeBSD, Linux, MAC 8.6 or higher
IDE Interface ATAPI/ATA-133
IEEE 1394b Interface IEEE 1394b, IEEE 1394a compatible 
Supports data transfer rate up to 800 MBps
Operating Temperature 0oC to 50oC
Operating Humidity 5% to 95% non-condensing
Dimensions 3.75in(W )x 1.45in(H) x 0.8in(D)
Connectors 40-pin IDE connector x 2
9-pin IEEE 1394 connector x 2
3-pin power connector x 1
Power Requirement 5V/DC; 130mA ~ 200mA
Frequently Asked Questions Q: A: