Dual SATA (6G) PCIe Controller, Marvell 88SE9120 W Low Profile Bracket - S3-PCIe21-S
Upgrade computer system with the faster and newer bus - SATA3 @ 6.0Gbps controller PCI express V2.0 Dual SATA (6G) PCIe Controller, Marvell 88SE9120 w Low Profile Bracket -fully supports AHCI - Driverless for MAC, Windows and Linux. EOL -
Please use this replacement: http://www.datoptic.com/ec/6gb-dual-SATA-port-host-support-pm-mac-windows-linux.html
Using PCIe V2.0 bus host, our S3-PCIe21-S , based on Marvell-88SE9128 chip-set, provides dual SATA3 (6.0Gb) data channel that harnesses the massive storage space up to ten (10) hard drives when connected to our SPM3726, or simple two (2) SSD, SATA and configured as hardware Raid 0/1 with encryption capability.
The 2x SATA ports on S3-PCIe21-S have a bandwidth of 6.0Gbps per port, making them ideal for connecting fast SSD. To further enhance the performance, end users can increase with configuration as Raid0 or Raid1 for higher reliability. It features advanced hardware encryption to protect user data on the fly and hardware RAID to offload the host CPU.
A complete suite of RAID 0/1 software is provided, including the OS device driver, BIOS/FW, and a management utility.
Support for FIS Based Port Multipliers
Traditional SATA controllers only support CMD based switching which can only access a single drive at a time, limiting performance to that of the drive being accessed.
The S3-PCIe21-S supports FIS based switching which accesses multiple drives simultaneously, effectively aggregating the bandwidth of all the drives, including CD/DVD/BD drives.
For OEM or bulk quantity pricing, please contact sales@DATOptic.com.
|Operating Temperature||0o C to 50o C|
|Operating Humidity||5% to 95% non-condensing|
|Dimensions||6.75 (L) x 5.5 (W) x 1.5 (H) inches|
Q How do I update the firmware of eS3-PCIe12-U
A Here are the steps to update the firmware
1 - Create a Boot USB with this utility https://github.com/downloads/pbatard/rufus/rufus.exe
2 - Unzip and Copy the attache file to the newly create USB pen
3 - Boot from it
4 - At the prompt enter AHCI.. It should update the card with correct firmware. (951)