
Two ESATA Ports 34mm Express Card For MAC/Windows/Linux
eSATA-EC-B is a single-chip PCI Express 1x (2.5Gbps) to 2-port eSATA host controller that takes SATA performance and features to enterprise levels. The eSATA-EC.
Based on the SiI-3132 chipset, integrates Serial ATA II PHY technology capable of running SATA 2nd Generation speeds of 3Gbps, hot-plug capable on all four SATA port and fully supports Port Multiplier technology (PM ware).
eSATA-EC-B - Key Features
- Fully compliant with Serial ATA 1.0a and Serial ATA II Extensions to Serial ATA 1.0a Specifications revision 1.1
- Supports Serial ATA Generation 2 transfer rate of 3.0 Gbps
- Supports Serial ATA II Port Multiplier 1.0 Specifications revision 1.1
- Supports First-party DMA commands for Native Command Queuing (NCQ)
- Staggered Spin-up Control
- RAID 5 (Distributed Parity RAID) has the Highest Read data transaction rate and Good aggregate transfer rate
- Complete with drivers for Windows 2000, XP and 2003 Server, Linux and MAC OS 10.3.x or later
Our latest eSATA-EC-B is a two eSATA PCI-Express SATAII connection host adapter, one-lane PCI Express (2.5Gb/sec) with two external Serial ATA (SATA) II host controller, that brings high speed features to the laptop environment, support up to TEN SATA II thru Port Multiplier (SiI 3736 or SiI4726 or SPM394 hardware Raid).
Our eSATA-EC-B, based on SiI 3132, supports 34mm Express card bus 2.5Gbps and the SATAII transfer rate of 3.0 Gbps (300 MB/s). The eSATA-EC-B is fully compliant with the Serial ATA 1.0 specification and supports all SATA II extensions, including Native Command Queuing, enclosure management device support, selectable output strengths for backplane and hot-plug support. It also supports the SATA port multiplier specification (SiI3726) and FIS-based switching, which enables the execution of commands and transfer of data to multiple drives concurrently for unequaled data throughput over a single SATA link. In addition, the eSATA-EC-B, based on SiI 3132, supports ATAPI commands, making it applicable for optical drives.
Our eSATA-EC-B, based on SiI 3132, comes with drivers for the Windows, Linux and Novell Netware operating systems for both RAID and non-RAID operations. Software RAID 0 (striping), RAID 1(mirroring), RAID 1+0 (mirrored stripe), and RAID 5 (parity stripe), functions are supported through Silicon Image’s SATARaid™ RAID management GUI software utility. Our eSATA-EC-B, based on SiI 3132, host controller is designed for optimum performance. Multiple commands for each port are loaded into on-chip memory eliminating the need for host CPU intervention and minimizing PCI bus usage. Command execution engines dramatically reduce latency between commands, ensuring that drives stay fully loaded with queued commands.
For OEM or bulk quantity pricing, please contact sales@DATOptic.com.
eSATA-EC-B Drivers eSATA-EC-B SATARAID tools eSATA-EC-B User Guide |
Windows, MAC and Linux (32 and 64 bit) Windows, MAC and Linux (32 and 64 bit) All OS |
Part Number | eSATA-EC-B |
Hardware | Two eSATA (3Gb) base SiI-3132 |
Host Interface | One (1x) lanes 34mm Express Card 2.5Gbps |
Device Interface | Two independent eSATA ports @ 3.0Gbps Fully supports PM ware (port multiplier) |
Speed | SATA II - 3.0Gbps Compatible to SATA I - 1.5Gbps |
Operating Temperature | 0o C to 50o C |
Operating Humidity | 5% to 95% non-condensing |
Support OS | Windows XP/Vista/2003 Server/2008 Server /Win7*- 32bits Windows XP/Vista/2003 Server/2008 Server - 64bits Linux 32 / 64bit; Novel Netware Macintosh OS 10.4, 10.5, and 10.6* |
Mode Configuration | RAID mode: jumper set @ 1~2 BASE /JBoD mode: jumper set at @ 2~3 |
* Only in BASE bios (JBoD)