JBoD Five SATA Tray-Less Enclosures ESATA* 6Gb/S For Mac, Windows, FreeBSD And Linux
The DATOptic a new version of sBOX-P is a five tray-less JBoD enclosure with SATA (6Gb) host connection. The sBOX-P enclosure features built-in port multiplier (JMB575 Port Multiplier) and offers five (5) individual independent SATA tray-less hot swap channels with DirectAir Technology. Our new version sBOX-P is the best thermal and most quiet SATA III JBoD.
As low as $279.95
sBOX-P - Key Features
- Host connection; eSATA 6Gb (SATAIII) - Fully compatible eSATA (3Gb - must supported PM ware )
- Hot swap-able up to FIVE Serial ATA III drives without tray - save time and money
- 48-bit LBA technology disk drives can access 2.0TB and beyond
- eSATA host interface 6.0Gb / 3.0Gb - compatible with 1.5Gb
- 240% over-rate of mobile rack fan - more than double the fan file
- HDD now can swap in and out like floppy disks
Our NEW version of sBOX-P offers FIVE (5) tray-less hot-swap bay with direct air cooling technology for those demanding a highly reliable 24/7 and extremely fast 6G.0Gbps SATA III storage solution. The sBOX-P with incorporated JMB575 Port Multiplier chipset to five tray-less enclosure features DirectAirtm (patent pending) technology and the latest Serial ATA III storage technologies. It delivers unprecedented performance across- multiple platforms: Macintosh, Linux, Windows, FreeBDS and Novell at 6.0Gbps transfer bandwidth. Our sBOX-P with eSATA 6Gb host connection enclosure is a FASTEST single cable to multiple drives JBoD enclosure in the market
DirectAirtm forces air directly into hard drives, keeping their temperature close to ambient, often resulting close to 100% of heat dissipation being removed, and keeping the hard drive cool. This not only increases HDD stability but their efficiency as well. This allows the sBOX-P to operate 24/7 without worry of thermal run-away over-heating and definitely prolongs the hard drive life expectancy.
Available and ready to ship, our sBOX-P provides an essential solution and data rates to next-generation storage used in high-end applications, such as audio/video (A/V) editing. Our sBOX-P offers full SATA III FIS based switching. When the host software alternates commands to the drives, the commands are able to overlap using the hardware queue and restructure the data back into meaningful packets. The concurrent access and restructuring enable the combined speed of both drives to use the full bandwidth of the 3Gbps SATA host bus. The host controller must have a multi-level hardware queue and support FIS-based SATA switching.
Tray-less = Time and Money Saved
With the new patent connector, end users can use the hard disk like compact discs or floppy disks. There is no tool or hard drive tray required, just the hard drive itself. It saves time and money and prolongs SATA HDDs due to NO SCRATCH connections.
Click Next to see Patterned New and Improved SATA connection.
PSU Over Ratedtm
Many enclosures fail due to the PSU (power supply unit) being too close, not providing much of a buffer or safety net margin. But not with DAT Optic's sBOX-P. We use a hefty 320W PSU to insure the reliability of our enclosure. It is 120% over rated for the total power required by our sBOX-P's total power consumption.
For OEM or bulk quantity pricing, please contact sales@DATOptic.com.
Tray-less SATA I/II/III JBoD Enclosure eSATA 6Gb/s Interface
|Physical Mount Space||Up to five (5) SATA I / II / III drives, supports any SATA HDDs, including HDD greater than 2TB (tested with 10TB)|
|Operating System||Any OS eSATA (6Gb/s/3Gb/s) host support Port Multiplier|
|Drive Interface||SATA I / II / III up to five (5) drives|
|Cooling||Direct Air scheme to prolong HDD life cycle for 24/7 operation|
|Operating Temperature||0 oC to 50 oC|
|Operating Humidity||5% to 95% non-condensing|
|Dimensions||(H X W X D) 28.0 cm x 17.8 cm x 33.0 cm (11" x 7" x 13.0")|
|Connectors||1x Power connector
1x On/Off switch
|Power Supply||115-230VAC 50/60Hz; switch-able 300W Output Power|
|Weight||16.0lbs - 7.25Kg|