Ten Tray-Less SATAIII Bay Enclosure With ESATA (6Gb/S) And USB 3.1
DAT Optic's sBOX-XTLtm is a new version (2017) model high performance ten tray-less bay with dual eSATA 6Gb and USB 3.1 port connection enclosure using newest port multiplier 6Gb (2x JMB575 Port Multiplier). It offers ten (10) individual independent hot-swap SATA III bay without tray (save time and money).
The best-built enclosure (.016in - steel) industrial grade with 400W PSU, with 200% over the rate of the total power required.
As low as $599.95
sBOX-XTL - Key Features
- Support HDD greater than 2.0TB (10TB tested)
- Power on staggering, no tress on HDD or PSU
- Hot swap-able up to TEN Serial ATA II drives without tray - save time and money
- 48-bit LBA technology disk drives can access 2.0TB and beyond
- 2x eSATA host interface 6Gb - total of 12Gb/s bandwidth compatible with 1.5Gb
- 2x USB3.1 host interface 10Gb - fully support USAP protocol
- 400W PSU - Over rate 200% total power
- HDD now can swap in and out as floppy or CD-ROM - no tray
- Advanced data aggregation architecture for ultra-fast read and write operations
Our sBOX-XTLtm offers TEN (10) tray-less hot-swap bay with backplane to eliminate the cable connection to create a highly reliable 24/7 and extremely fast 6.0Gbps storage solution. The sBOX-XTLtm - incorporates two 6Gb/s Port Multiplier chipset to ten SATA 6Gb/s drive enclosure, features Advanced data aggregation architecture for ultra-fast read and write operations technology and latest Serial ATA III storage technologies It delivers unprecedented performance across-platform Macintosh, Linux, Windows at 12.0Gbps transfer bandwidth. Our sBOX-XTLtm with dual eSATA (6gb) ports connection enclosure is compatible with our eSATA 6Gb host controllers
Depend on OS, our sBOX-XTLtm can be used as a ten drive RAID5+hot spare single volume up to 180TB usable space (10x 10.0TB HDD) or TWO independent five drives configured as RAID or JBoD mode, which can connect to TWO separate systems, due to TWO independent eSATA channels.
PSU Over Ratedtm
Many enclosures fail due to the PSU (power supply unit) being rated too close, there is little buffer and low safety net margin, but not with DATOptic sBOX-XTLtm. We use a hefty 400W PSU to insure the reliability of our enclosure. It is 120% over rated of total power required by our sBOX-XTLtm total power consumption.
Available and ready to ship, our sBOX-XTLtm provides a massive storage solution and fast data rates to next-generation storage used in high-end applications, such as audio/video (A/V) editing. Our sBOX-XTLtm offers full SATA III FIS based switching, which when the host software alternates commands to the drives, the commands are able to overlap using the hardware queue and restructure the data back into meaningful packets. The concurrent access and restructuring enable the combined speed of both drives to use the full bandwidth of the 6Gbps SATA host bus. The host controller must have a multi-level hardware queue and support FIS-based SATA switching.
For OEM or bulk quantity pricing, please contact sales@DATOptic.com.
Ten (10) Tray-less Bay with 2x eSATA 6Gb | USB3.1 interfaces enclosure
|Physical Mount Space||Up to 10x SATA 3.5" drives|
|Operating System||Any OS supporting eSATA with Port Multiplier|
|HDD Interface||Up to 10x SATA I/II, III hard drives*|
|Host Connection||2x eSATA connections - support 3Gb/s and 6Gb/s and 2x USB3.1 to eSATA adapters|
|Cooling||Metal case and 2x 120mm whisper fan|
|Operating Temperature||0o C to 50o C|
|Operating Humidity||5% to 95% non-condensing|
|Dimensions||10.5" x 17.25" x 7.5" (D x H x W)|
|Connectors||eSATA (6Gb/3Gb) x 2
USB3.1/eSATA Adapter x 2
USB 3.1 Extension Cable x 2
Power connector x 1
On/Off switch x 1
|Power Supply||Switch-able 115-230VAC 50/60Hz; 400W Output Power|