Firewire 400 800 JBOD to 4 IDE drives

FireWire 400/800 Bridge Board To Four IDE HDD Featuring Initio Chipset

Firewire 400 800 JBOD to 4 IDE drives

Dual SATA Drive To USB And ESATA Bridge Featuring: RAID 0,1, Dual Volume

FireWire 400/800 Bridge Board To Four IDE HDD Featuring Initio Chipset

DAT Optic Inc. introduces the 1394b-4IDE - a FireWire 800/400 bridge board supporting FOUR ATA/ATAPI or SATA* devices.

*SATA drive will need an IDE to SATA adapter.

$59.95
Availability: In stock
SKU
1394b-4IDE

1394B-4IDE - Key Features

  • Two ATA Interface support FOUR drives
  • 1394b PHY: Ti's TSB81BA3
  • 1394 Bus Transfer Rate: 100/200/400/800 Mbps
  • FireWire Native Bridge Controller: Initio inic-2430L
  • Complies with T13's ATA/ATAPI-7 Draft Specification
  • PIO Mode 0-4
  • DMA Mode 0-2
  • Ultra DMA Mode 2, 4, 5, 6
  • Supports 48-bit addressing for large hard drives (>128GB)
  • Fits most standard SCSI enclosures (SCSI I Cut-out form factor)

    DAT Optic Inc. introduces the 1394b-4IDE - a FireWire 800/400 bridge board to attach FOUR ATA/ATAPI devices to provide a connection solution for greater flexibility of different configurations:

  • - SPAN - A single volume of FOUR HDD, up to 2.0TB
  • - RAID 0 - Four HDD Stripe configuration for the highest transfer rate
  • - RAID 1 - Two set of HDD configured as Mirror for the data redundant
  • - JBoD = or Just a Bunch of Drives.

    Once connected thru FireWire, attached drives are detected and mounted automatically with the appropriate protocol.

    1394b-4IDE is ideally suited for tailgate interface applications for ATA Hard Disk drives. 1394b-4IDE has two IDE channels. Each IDE channel can attachup to two (Master and Slave) ATA drives.

    1394b-4IDE provides RAID (Spanning, Striping and Mirroring) functions. 1394b-4IDE is aimed at higher-speed multimedia file storage applications. 1394b-4IDE provides the perfect solution for video or image file storage and transferring of data between computers using ATA devices.

    For OEM or bulk quantity pricing, please contact sales@DATOptic.com.

  • Write Your Own Review
    You're reviewing:FireWire 400/800 Bridge Board To Four IDE HDD Featuring Initio Chipset
    Your Rating
    Manual, Drivers, Download-able Manual: Mac Drivers, Utility Windows Drivers, Utility Linux Drivers, Utility
    Part Number S3PMS3P
    SATAIII - 6Gbps 1-To-5 Port Multiplier Bridge Board
    Output Port FIVE SATA I, II, III hard drives, Optical drives
    Supports ANY HDD size, including HDD greater than 2.0TB
    Host Port 5x SATAIII 6Gb
    Device Port 1x SATAIII 6Gb
    Chipset SoC - 6x SATAIII portsPort Multiplier
    Operating Temperature 0o C to 50o C
    Operating Humidity 5% to 95% non-condensing
    Dimensions 8.33cm(W) x 2.15cm(H) x 67.9cm(D)
    Connectors 1x SATAIII device 5x SATAIII host - connect to anyL type 4-pin power connector x 1 10 pin LED indicators
    Power Requirement 5V/DC; 130mA ~ 200mA
    Frequently Asked Questions Q: A: