Four Port USB3.0 Hub Panel Mount - Fit SCSI Cut Out
U3-RMH401 hub expands USB3.0 from one to four ports to increase the connectivity of new super speed USB technology. Perfect for system integration solution!
As low as $0.00
Out of stock
U3-RMH401 - Key Features
- Compliant to Universal Serial Bus 3.0 Specification Revision 1.0
- Compliant to Universal Serial Bus Specification Revision 2.0
- 4 (max.) downstream facing ports (right angle USB A receptacle connector)
- Supports USB 3.0 SuperSpeed (5Gbps), USB 2.0 Hi-Speed (480Mbps), Full-Speed (12Mbps), and Low-Speed (1.5Mbps)
- Upstream port (right angle USB B receptacle connector)
- In-house USB PHY employing advanced CMOS process to consume less power
- DC power input: floppy drive like mini-4pin power connector (Min. DC +5V/2.5A)
- Supports individual mode for power enable and overcurrent detection on each downstream port
- Supports hot plug
The U3-RMH401 is a high-performance Universal Serial Bus (USB) 3.0 Hub.
U3-RMH401 allows a single USB port to be used by up to four high-bandwidth USB 3.0 devices simultaneously.
U3-RMH401 allows for a maximum data transfer rate of up to 5Gbps, or ten times the throughput available to USB 2.0 based devices. Other enhancements provide for improved interaction between device and host controller, including important advancements in power management.
One upstream port and four downstream ports support not just SuperSpeed transfer, but are also backward compatible with previous USB specifications and offer support for Hi-Speed (480Mbps), Full-Speed (12Mbps), and Low-Speed (1.5Mbps) traffic.
For OEM or bulk quantity pricing, please contact sales@DATOptic.com.
Panel mount USB3.0 four ports hub
|Peripherals||One USB3.0 host connection to four USB3.0 host ports|
|Form Factor||SCSI cut out mountable|
|Operating System||Any OS supports USB3.0 | 2.0 and 1.1|
|Operating Temperature||0o C to 50o C|
|Operating Humidity||5% to 95% non-condensing|
|Other Functions||OTB - One Touch Backup|
|Dimensions||61.5(D) x 21.6(H) x 83.3(W) in mm|
|Connectors||USB3.0 Device connector x 1 (device) USB3.0 host connector x 4 (host)|
|Power Requirement||5V/DC; 80ma ~ 200mA|
|Package Contents||U3-RMH401 bridge board|