Parallel ATA To Serial ATA Host Mode Bridge Board Featuring Marvell 88SA8052 Bridge Controller
IDE-SATA07 is a Parallel ATA to Serial ATA Host interface Bridge Board featuring Marvell 88SA8052 Serial ATA bridge Controller.
IDE-SATA07 is ideal for adapting the latest SATA to an exsiting IDE (PATA) interface equipement.
Fully supports both ATA and ATAPI drives with the same firmware.
Our IDE-SATA07 is a converter solution for the Serial ATA Device to IDE (PATA) which can be ATA or ATAPI devices. It has a standard 22 pin SATA port which can interface to a Serial ATA device (Hard Disk, CD-ROM, DVD, CD-RW, etc). It accepts Parallel ATA (IDE) commands through the 40 pin IDE connector from the host, decodes the commands and converts them to a Serial ATA commands to the devices. Responses from the device through the SATA bus are deciphered, processed, and converted to a parallel ATA protocol and sent to the host.
The SATA-SATA07 bridge board supports the Serial ATA Generation 1 transfer rate of 1.5 GB/s (150 MB/s) on the serial ATA side and is compatible with Ultra ATA-133 on the parallel ATA side.
For OEM and bulk quantity pricing, please contact sales@DATOptic.com.
|Part Number||IDE-SATA07 Parallel ATA to Serial ATA Host Bridge Board
featuring Marvell 88SA8052 Serial ATA bridge Controller
|IDE Peripherals||Compliant ATA33 to 133 and ATAPI interface|
|Operating System||Transparency to OS|
|SATA Interface||SATA version I - 1.5Gbps|
|Connection||Direct connection to Serial ATA|
|Operating Temperature||0o C to 50o C|
|Operating Humidity||5% to 95% non-condensing|
|Dimensions||2.3 " x 1.00" (5.85cm x 2.54cm)|
|Connectors||Serial ATA connector x 1
40pin IDE connector x 1
Molex Power connector x 1
|Power Requirement||5V/DC; 130mA ~ 200mA|
|1x IDE-SATA07 Bridge Board
1x AC power cable