
Parallel ATA To Serial ATA Host Mode Bridge Board Featuring JMicron JM20330APC0 Bridge Controller
IDE-SATA20 is a Parallel ATA to Serial ATA host interface bridge board featuring JMicron JM20330APC0 Serial ATA bridge controller.
IDE-SATA20 is an ideal solution to adapt the latest SATA to the existing IDE (PATA) interface equipment.
Fully support both ATA and ATAPI drive with the same firmware.
Want to convert a 10,000rpm Serial ATA HDD to IDE interface or just any SATA drive? Our IDE-SATA20 is the perfect adapter for the job! Attach our IDE-SATA20 to the back of all types of Serial ATA Devices (such as Hard Disk, DVD, DVD-RAM, CD-ROM, CD-RW, MO, etc) to make them become IDE Devices to work with IDE host controllers.
Our IDE-SATA20 is a converter solution for the Serial ATA Device to IDE (PATA) which can be ATA or ATAPI device. It has a standard 22 pin SATA port which can interface to a Serial ATA device (hard disk, CD-Rom, DVD, CD-RW, etc). It accepts Parallel ATA (IDE) commands through the 40 pin IDE connector from the host, decodes the commands and converts them to a Serial ATA commands to the device. Response from the device through the SATA bus is deciphered, processed, and converted to a parallel ATA protocol and sent to the host.
The SATA-SATA4 bridge board supports the Serial ATA generation 1 transfer rate of 1.5 gb/s (150 MB/s) on the serial ATA side and is compatible with Ultra ATA-133 on the parallel ATA side.
For OEM or bulk quantity pricing, please contact sales@DATOptic.com.
Part Number | IDE-SATA20 ,br>Parallel ATA to Serial ATA Host Bridge Board featuring JMicron JM20330APC0 Serial ATA bridge Controller |
IDE Peripherals | Compliant ATA33 to 133 and ATAPI interface |
Operating System | Transparency to OS |
SATA Interface | SATA version I - 1.5Gbps |
Connection | Direct connection to Serial ATA |
Operating Temperature | 0o C to 50o C |
Operating Humidity | 5% to 95% non-condensing |
Dimensions | 3.97" x 1.00" (10.09cm x 2.54cm) |
Connectors | Serial ATA connector x 1 40pin IDE connector x 1 Molex Power connector 1x |
Connectors | eSATA Multilane/Infiniband x 2 Power connector x 1 On/Off switch x 1 |
Power Requirement | 5V/DC; 130mA ~ 200mA |
Package Contents |
1x IDE-SATA20 Bridge Board 1x AC power cable |