Firewire 400 800 JBOD to 4 IDE drives

Quad ESATA To SATAIII (Latch Type) Bracket Fit SCSI Cut Out - 25cm Cable Length

Firewire 400 800 JBOD to 4 IDE drives

Dual Channel Serial ATAIII 6G/S PCI Bracket

Firewire 400 800 JBOD to 4 IDE drives

SATA To IDE Bridge Convert ATAPI/ATA-133 (PATA) To SATA Bus

Quad ESATA To SATAIII (Latch Type) Bracket Fit SCSI Cut Out - 25cm Cable Length

Quad Host eSATA bracket for SCSI cut out support SATAI, SATAII and SATAIII

$13.95
Availability: In stock
SKU
eSSA-BKT-Q

eSSA-BKT-Q is a Quad eSATA 7pin receptacle to SATA 7pin plug (latch type) extension cable fully supports SATAI, SATAII and SATAIII integrated on SCSI 1 form factor bracket with 25cm (1.0ft) cable length. Different cable lengths available - please contact us. With PCI bracket: you can have 4 eSATAs in the back of your system for your internal SATAI, SATA II and SATA III host


Directly attaches the 7 position SATAI, II, and III plug to the eSATA devices and fastens the SCSI 1 50pin low-density Centronics Connector form factor bracket to the enclosure.


Technical Specifications

  • Upstream: eSATA 7pin Receptacle Connector
  • Downstream: SATA 7pin Plug Connector (latch type)
  • Fully support hot-plug feature of SATAII and SATA III
  • support SATAI, SATAII, and SATAII transfer rate; 1.5GB; 3.0Gb and 6.0Gb/s
  • Wires: UL2725 26AWG Red
  • w/ SCSI 1 50pin low density Centronics Connector form factor bracket (S-BR-00116-02-1020)
  • RoHS Compliant


    For OEM or bulk quantity pricing, please contact sales@DATOptic.com.

Write Your Own Review
You're reviewing:Quad ESATA To SATAIII (Latch Type) Bracket Fit SCSI Cut Out - 25cm Cable Length
Your Rating
Manual, Drivers, Download-able Manual: Mac Drivers, Utility Windows Drivers, Utility Linux Drivers, Utility
Part Number S3PMS3P
SATAIII - 6Gbps 1-To-5 Port Multiplier Bridge Board
Output Port FIVE SATA I, II, III hard drives, Optical drives
Supports ANY HDD size, including HDD greater than 2.0TB
Host Port 5x SATAIII 6Gb
Device Port 1x SATAIII 6Gb
Chipset SoC - 6x SATAIII portsPort Multiplier
Operating Temperature 0o C to 50o C
Operating Humidity 5% to 95% non-condensing
Dimensions 8.33cm(W) x 2.15cm(H) x 67.9cm(D)
Connectors 1x SATAIII device 5x SATAIII host - connect to anyL type 4-pin power connector x 1 10 pin LED indicators
Power Requirement 5V/DC; 130mA ~ 200mA
Frequently Asked Questions Q: A: