Firewire 400 800 JBOD to 4 IDE drives

SATA To IDE Bridge Convert ATAPI/ATA-133 (PATA) To SATA Bus

Firewire 400 800 JBOD to 4 IDE drives

Quad ESATA To SATAIII (Latch Type) Bracket Fit SCSI Cut Out - 25cm Cable Length

Parallel ATA To Serial ATA Host Mode Bridge Board Featuring JMicron JM20330APC0 Bridge Controller

Parallel ATA To Serial ATA Host Mode Bridge Board Featuring JMicron JM20330APC0 Bridge Controller

SATA To IDE Bridge Convert ATAPI/ATA-133 (PATA) To SATA Bus

Convert your existing IDE, PATA to SATA devices with our IDE to SATA converter - it's simple and no driver is required. Just plug and play.

$14.95
Availability: In stock
SKU
SATA-IC2

SATA-IC2 - Key Features

  • Convert any type of ATA and ATAPI devices to SATA
  • 48 bits LBA address - no HDD size limitation
  • Support ATAPI UDMA4 Mode for fastest burning speed
  • Automatically decode the ATAPI command to determine the Drive UDMA mode
  • 100% hardware bridge converter board to support PC, MAC, and Linux environment


Introducing our latest SATA-IC2 (Serial ATA Internal Converter) using the second generation of Silicon Image bridge, a first Serial ATA bridge can AUTO DETECT ATAPI UDMA mode of optical devices (ATAPI) and take full advantage of the high transfer rate of UDMA mode. Our SATA-IC2 (Serial ATA Internal Converter), with its onboard serializer/deserializer and, is compatible with ANY IDE HDD, therefore, all of the NEW or existing HDD now can operate in a hyper-fast 1.5Gb bus.


DATOptic SATA-IC2 features a direct-plug-in standard IDE connector that can easily interface to ANY IDE device such as Hard Disks, DVD/CD writer and reader.


Our SATA-IC2 (Serial ATA Internal Converter) accepts Serial ATA commands from the host's Serial ATA interface, decodes the commands and converts them to Parallel ATA device commands. Through the Parallel ATA bus, responses from the device are deciphered, processed, and converted to Serial ATA protocol and sent to the host. Therefore the ATA/ATAPI device is less taxing on the CPU than ordinary IDE devices.


For OEM or bulk quantity pricing, please contact sales@DATOptic.com.

Write Your Own Review
You're reviewing:SATA To IDE Bridge Convert ATAPI/ATA-133 (PATA) To SATA Bus
Your Rating
SATA-IC2 no driver needed - just plug and play
Part Number SATA-IC2 
SATA to IDE Bridge Support ATA-133 and ATAPI Device
IDE Peripherals Mass stroage Drive: HDD/CD/DVD-ROM/RW/RAM
IDE Interface ATAPI/ATA-133
Operating Temperature 0o C to 50o C
Operating Humidity 5% to 95% non-condensing
Dimensions 0.6in(L) x 3.75in(W) x 1.45in(H)
Connectors Direct connect IDE connector x 1 
4-pin power connector x 1 (power cable included) 
Serial connector (Serial ATA cable included)
Power Requirement 5VDC@ 130mA ~ 200mA 
12VCD @ 10ma
Connectors Serial ATA connector x 1 
40pin IDE connector x 1 
Molex Power connector 1x
Connectors eSATA Multilane/Infiniband x 2 
Power connector x 1 
On/Off switch x 1
Power Requirement 5V/DC; 130mA ~ 200mA
Limited warranty One (1) year
Part Number SATA-IC2 
SATA to IDE Bridge Support ATA-133 and ATAPI Device
IDE Peripherals Mass stroage Drive: HDD/CD/DVD-ROM/RW/RAM
IDE Interface ATAPI/ATA-133
Operating Temperature 0o C to 50o C
Operating Humidity 5% to 95% non-condensing
Dimensions 0.6in(L) x 3.75in(W) x 1.45in(H)
Connectors Direct connect IDE connector x 1 
4-pin power connector x 1 (power cable included) 
Serial connector (Serial ATA cable included)
Power Requirement 5VDC@ 130mA ~ 200mA 
12VCD @ 10ma
Connectors Serial ATA connector x 1 
40pin IDE connector x 1 
Molex Power connector 1x
Connectors eSATA Multilane/Infiniband x 2 
Power connector x 1 
On/Off switch x 1
Power Requirement 5V/DC; 130mA ~ 200mA
Limited warranty One (1) year
Frequently Asked Questions Q: A: