Firewire 400 800 JBOD to 4 IDE drives

ESATA 7pin Receptacle To SATA 7pin Plug Signal Extension Cable With PCI Bracket

6Gb SATAIII Port Multiplier 1 To 5 SATAIII Bridge PCI Bracket Mount-Able

6Gb SATAIII Port Multiplier 1 To 5 SATAIII Bridge PCI Bracket Mount-Able

Firewire 400 800 JBOD to 4 IDE drives

Two ESATA 7pin Receptacle To SATA 7pin Plug Signal Extension Cable With PCI Bracket

ESATA 7pin Receptacle To SATA 7pin Plug Signal Extension Cable With PCI Bracket

eSATA-PBKT is a Serial ATA signal extension cable with PCI bracket.

$6.00
Availability: In stock
SKU
eSATA-PBKT
Directly attaches to the 7 position SATA connector to the SATA host controller and fasten the PCI bracket to the rear panel of the computer.


Allows users to use their internal SATA connector from onboard motherboards or SATA controllers as external eSATA connector.

For OEM or bulk quantity pricing, please contact sales@DATOptic.com.

Write Your Own Review
You're reviewing:ESATA 7pin Receptacle To SATA 7pin Plug Signal Extension Cable With PCI Bracket
Your Rating
Driver - Manual - Utilities Not Applicable
Part Number eSATA-PBKT
Cable Conductor: 26AWG solid tinned copper 
Isolator: FOAM PE or FOAM PP 
Wrapping: Hot melt aluminum mylar spirally wrapped 
Drain Wire: 28AWG solid tinned Copper 
Jacket: 80C PVC OD 2.2mm*7.80mm+/-0.2
Connector Housing: Temperature polyster & Glass fiber, UL 94V-0 
Terminal: Copper alloy 
Cover: ABS, UL 94V-0 
Plating: 15 µM gold plated over 50µM nickel
High Frequency Character Impedance: 100+/-15 ohms (Mated connector) 
Attenuation: 6 dB Max from 10MHz ~ 4500MHz 
Crosstalk (NEXT): -26dB Max from 10MHz ~ 4500MHz 
Intra pair skew: 10 pcs Max 
Rise Time: 85 ps Max
Frequently Asked Questions FAQ Q Why Windows can not see all the drives? A Download the latest drivers of your USB chip set. 99.99% of the time, new drivers will solve the problem. Please update your USB3.0 drivers to the revision below, then Win7's USB3.0 will work. - Installed latest Windows Updates as required - Intel USB3.0 version V1.0.5.235 - Fresco USB3.0 Driver Version V3.5.42.0 - AsMedia USB3.0 Driver Version V1.14.8.0 - NEC USB3.0 Version V2.1.32.0 - chipset uPD720200 - NEC USB3.0 Version V3.0.16.0 - chipset uPD720201 - TI USB3.0 Version V12.18 - chipset TUSB7340 Q Why my Linux box is having issue with my U3eSATA adapter? A Port Multiplier in USB3.0 requires the latest xHCI drivers, so you can complied the latest driver or use kernel 3.13-1-xxx. Q Do I have the latest firmware on my U3eSATA order? A ANY USB3.0 to eSATA shipped after Dec-2011 should have the latest firmware. Q Do I need to flash the firmware listed in the right column, in order to use with my BD/DVD writer? A No! You do not need to flash it. Current Firmware supports Optical drives, unless you encounter problems using your Optical drive, and after you have confirmed the LATEST driver for USB3.0 is installed. Q Why my eSATA box connected with U3eSATA keep disconnect to my MAC OS 10.x.x? A MAC OS 10.x.x puts USB device to sleep. Here is the app that keep USB device stay connected Keep USB drive spinning Q Today, our back up using Carbon Copy connect via U3eSATA was disconnected again and the backup from the previous night had failed. The Mac Mini gave me the OS X couldn't repair the disk error and wouldn't allow me to write to the U3eSATA+enclosure but I could still read the data. A The issue caused by the backup program (Carbon Copy) was overwriting the file that was put on the backup with the file that was on the primary. Please configured Carbon Copy to not copy or modify Root directory files on the destination and it should cure the issue.