Slim PATA (ATAPI) Drive To USB2.0 Host Adapter/Bridgeboard
Convert Slim ATAPI drive (CD/DVD/BD) to bootable USB drive with our direct connect SU2-ATAPI adapter. Combine SU2-ATAPI and our INT-USB cable, a system builder can utilize existing USB host connection in mother server board, workstation to boot from Slim ATAPI drive.
SU2-ATAPI - Key Features
- Supports ANY ATAPI slim Optical drive, including Blu-ray drives
- Support bootable USB2.0 (hi-speed) BIOS, transparent to OS, no driver needed
- USB bus transfer rate: high speed (480 Mbit) or full speed (12 Mbit)
- Fine-pitch 50-pin connector for slim ATAPI Optical drive
Fully compatible with all kinds of slim ODDs, like CD-ROM, DVD-ROM, CD-RW, Blu-ray (BD), and DVD-RW drives.
SU2-ATAPI is a USB 2.0 to Slim PATA (ATAPI) bridge board with direct connect solution to convert a standard slim ATAPI (PATA 50pins) drive, including slim Blu-ray drives to USB2.0 device. It receives standard Mass Storage Device Class (MSDC) SCSI commands from the USB host and translates them into ATA/ATAPI commands then sends it to the device in machine state, therefore it is close to zero latency. The maximum transfer bandwidth can go up to 480Mb/sec.
SU2-ATAP supports USB host controller in UHCI, OHCI, EHCI modes. It means your PATA device now can be a hot plug, hot swap and operate at a transfer rate up to 480Mbps.
For OEM or bulk quantity pricing, please contact sales@DATOptic.com.
|Manual, Driver, etc||No download available|
Direct connect USB 2.0 to Slim ATAPI drive bridge/adapter
|Drive Port||Slim ATAPI type connector|
|Form Factor||SCSI cut out mountable|
|Host Connection Ports||USB2.0|
|Operating System||Any OS support USB bus|
|Operating Temperature||0o C to 50o C|
|Operating Humidity||5% to 95% non-condensing|
|Dimensions||10.15cm x 1.27cm (4" x 0.49")|
|Connectors||1x Fine-pitch 50-pin connector for slim CD/DVD drive
|Power Requirement||USB bus power - no external power required|