Slim SATA Optical Drive To USB2.0 Host Adapter/Bridgeboardc
Convert Slim SATA optical drives (CD/DVD/BD) to boot-able USB drives with our direct connect SU2-SATA adapter.
Combine SU2-SATA and our INT-USB cable, a system builder can utilize existing USB host connection in mother server board, workstation to boot from Slim SATA Optical drive.
- Supports direct connect CD/DVD/BD Slim SATA Optical drives
- Support boot-able USB2.0 (hi-speed) BIOS, transparent to OS no driver needed
- USB bus transfer rate: high speed (480 Mbit) or full speed (12 Mbit)
- External power, USB pin header, and USB type B connector
- RoHS Compliant, 1-year warranty
SU2-SATA is a USB 2.0 to Slim PATA (ATAPI) bridge board with direct connect solution to convert a standard slim SATA optical drive (ODD), including slim Blu-ray drives to USB2.0 devices. It receives standard Mass Storage Device Class (MSDC) SCSI commands from the USB host and translates them into SATA/ATAPI commands then send it to the device in machine state, therefore it is close to zero latency. The maximum transfer bandwidth can go up to 480Mb/sec.
SU2-SATA supports USB host controller in UHCI, OHCI, EHCI modes. It means your SATA device now can be a hot plug, hot swap and operate at a transfer rate up to 480Mbps and free up the high-speed SATA port in your motherboard.
For OEM or bulk quantity pricing, please contact sales@DATOptic.com.
Direct connect USB 2.0 to Slim SATA optical drive bridge/adapter
|Drive Port||Slim SATA type connector|
|Form Factor||Direct connect to slim optical SATA drive|
|Host Connection Ports||USB2.0 / USB1.1|
|Operating System||Any OS supporting USB bus|
|Operating Temperature||0o C to 50o C|
|Operating Humidity||5% to 95% non-condensing|
|Dimensions||10.15cm x 1.27cm (4" x 0.49")|
|Connectors||1x Slim SATA connector for slim CD/DVD/BD drives
|Power Requirement||USB bus power - no external source required|