Portable Thunderbolt 2 Sixteen (16) 2.5 in SATA | 6Gb SAS | SSD RAID compact, quiet tower support Mac, Linux, and Windows

P16-S6.TB2 - Key Features

• Dual Thunderbolt 2 (40Gb) port system
• Raid Engine with ARM_based 933MHz storage processor, 1GB onboard DDR3-933 SDRAM with ECC protection
• 48bit LBA - Support hard drive as large as 64TB, tested with 2TB SSD
• Supports hardware RAID level 0, 1, 3, 5, 6, 10, 50, 60 + hot spare in Mac, Linux, and Windows
• RAID array roaming - Move RAID to a different system without the rebuild
• Supports Multiple RAID/JBOD Array volumes
• Schedule-able with idle time trigger scheme to perform volume check, ensure top-notch data integrity
• Online capacity expansion & RAID level migration simultaneously
• Automatic drive insertion/removal detection and rebuilding
• Support S.M.A.R.T, NCQ, and OOB staggered spin-up capable drives SMTP support for email notification
• SNMP agent support for remote SNMP Manager Support SAS 3 (12Gb) HDD and expandable up to 1024 drives with SAS Option selected
• Daisy chain up to six Thunderbolt device/system or a MASSIVE and hyper-fast data storage
• Made in USA with some imported parts

High Performance
With the direct connection to system host via Thunderbolt 2 20Gb/s bidirectional high performance I/O, P16-S6.TB2 provides unparalleled high reliability of data protection for users who demand enterprise-class performance. P16-S6.TB2 not only provides a highly reliable sustained data rate over 40Gb/sec bandwidth, and support spin down drives when not in use to extend service life, including automatic drive insertion/removal detection and rebuilding.

Tray-less
Finally, HDD manufacturers agree to a universal connectivity of SATA/SAS HDD, where SSCI or IDE/ATA this never happen due to the location of connection was anywhere but the same place. Take advantage of SATA/SAS specification a tray-less is realized to save time and money, To replace an HDD is in seconds instead of minutes due to finding tool

Easy RAID Management
P16-S6.TB2 utilizes built-in firmware with an embedded terminal emulation which can be accessed via hotkey at BIOS booting screen (PC/Linux platform) locally or remotely accessed via HTTP proxy and/or IP address.

• A hotkey at BIOS boot-up screen. This pre-boot manager utility can be used to simplify the setup and management of the RAID configuration (PC x86 Platform)
• RAID set up and management can be accessed via a Web browser through the Http Proxy server functions in MAC and Windows. This method allows both local and remote control, configuration, and monitoring of RAID status
• RAID set up and management can be accessed via a Web browser through the IP address. This method allows both local and remote control, configuration, and monitoring of RAID status

Enterprise Feature
Schedule-able volume check based on your demand to ensure volume integrity as the hight possible, If you ever worry about a rotten data bit, this is the cure

Monitor and Report
Unlike other RAID systems in the market, P16-S6.TB2 fully supports S.M.A.R.T. Self-Monitoring, Analysis, and Reporting Technology, and email notification. Our P16-S6.TB2 can notify by email up to four email addresses on any predefined event, even just a daily report of the RAID itself. This certainly will take out the guesswork and uncertainty about the storage Raid array.

For OEM or bulk quantity pricing, please contact sales@DATOptic.com.