USB 3.1 To SATAIII (6Gb) Direct Connect Support UASP, MAC, Windows And Linux

USB 3.1 To SATAIII (6Gb) Direct Connect Support UASP, MAC, Windows And Linux

USB3.0 To SATA3 (6Gb) Write-Block Bridge Board Panel-Mount

USB3.0 To SATA3 (6Gb) Write-Block Bridge Board Panel-Mount

USB 3.1 To SATAIII (6Gb) Direct Connect Support UASP, MAC, Windows And Linux

Read/write existing data on SATAI/II/II drive at USB 3.1 speed (10.0Gb). Driver-less for MAC, Windows, and Linux Optimized For SSD, Support UASP SATA III to USB 3.1. No drivers require, plug and play, fully compatible to USB 3.0, UBS 2.0

$39.95
Availability: In stock
SKU
U31-S3.D
U31-S3.D - Key Features Supports latest USB 3.1 | USB3.0 | USB2.0 - 10/Gbps / 5.0Gb / 480Mb respectively Optimized For SSD SATAIII, support UASP protocol 2.5 drive bus power bridge, no extra power input required Support over 2.0TB volume capacity Up to 600MB/s read/write with SSD Power to ANY 2.5 HDD, including SSD. SATA 7200 rpm U31-S3.D is a 10Gbps USB 3.1 to SATAIII (6Gb/s - SATAI/II compatible) adapter that allows end users to convert ANY SSD SATA drive at 10Gbps bandwidth (USB 3.0 | USB 2.0 | USB 1.1 compatible) U31-S3.D translates the communication protocol between SATA III (6Gb/s - SATAI/II compatible) and 10Gbps USB 3.1 commands with uASP protocol allowing multiple data packages transfare at the same time., thus enhance and increase data transfer rate greatly. Fully compliant with USB3.0 Specification Rev 1.0 and USB Mass Storage Class Bulk-Only Transport Specification. To use with eSATA device you need an SATA to eSATA cable or a SATA to eSATA adapter cable. With that you can enjoy much more improve performance of your eSATA / SATA device For OEM or bulk quantity pricing, please contact sales@DATOptic.com.
Write Your Own Review
You're reviewing:USB 3.1 To SATAIII (6Gb) Direct Connect Support UASP, MAC, Windows And Linux
Your Rating
Manual, Driver, etc This adapter is driver-less with Windows, MaC and Linux USB host
Part Number U31-S3.D Direct plug and power to 2.5 HDD especially SSD drive
Peripherals One SATA host connection drive 
Fully support all size SATA HDD including 1.0TB, 1.5TB, 2.0 and 8.0TB
Operating System Support any OS support USB drive - Driverless
Drive Interface SATAI, SATA II, SATAIII
Host Interface USB3.1 fully compatible USB 3.0, 2.0, and 1.1
Operating Temperature 0o C to 50o C
Operating Humidity 5% to 95% non-condensing
Connectors USB 3.1 connector x 1 (device) 
SATA connector x 1 (host) 
Bus powered - only to SSD or 2.5" HDD
Power Requirement 5V/DC; 80ma ~ 200mA
Frequently Asked Questions Q: A: