USB3.0 To SATA3 (6Gb) Write-Block Bridge Board Panel-Mount
Slim PATA (ATAPI) Drive To USB2.0 Host Adapter/Bridgeboard
USB 2.0 To SATA Bridge Board
Storage processor with embedded USB 2.0 and eSATA interfaces. The U2-SATA14 is a low-cost, single bridge solution for digital home and small office storage appliances.
This SteelVine Storage Processor RAID bridge connects a USB 2.0 or 3 Gbps eSATA host port to two 3 Gbps eSATA Gen2m device ports. Features of the U2-SATA14 include advanced RAID modes, drive locking and single-button backup.
U2-SATA14 - Key Features
- Supports both HDD and ODD
- Supports HDD security features
- SCSI I 50pin Low-Density Centronics Connector Form Factor
- Supports Serial ATA Port Multiplier with command base
- SATA Latch Type Connector
U2-SATA14 is a USB 2.0 to SATA bridge board. It has a USB high-speed device port and a SATA 1.5Gb/s host port. It receives standard Mass Storage Device Class (MSDC) SCSI commands from the USB host and translates them into ATA/ATAPI commands to the SATA device. The maximum throughput can go up to 30MB/sec.
For OEM or bulk quantity pricing, please contact sales@DATOptic.com.
USB 2.0 to SATA Bridge Board
||SATA L type connector
||SCSI cut out mountable
|Host Connection Ports
||Windows ME/2000/XP/2003; MacOS 10 or higher; Linux
||0o C to 50o C
||5% to 95% non-condensing
||83.3mm x 33.85mm x 28.2mm
||1x SATA L type
||5V and 12VDC with Floppy connector
Frequently Asked Questions
Q: Does it support 5 SATA port multiplier with JMB321, which is very popular on the net? Thank you.
A: Yes, It does, the chipset we used is JMicron
Q: Are you working on firmware to support silicon image? I would love to be able to use your product!
A: Unfortunately, Silicon Image is longer exist, therefore we can not get any data, or support to make this compatible with our adapter. Sorry there is no other way
Q: Connecting Ratoc SA-DK5ES multi HD tower with Mac Book Pro 15" 2016 with High Sierra OS. Ratoc Support wrote: SA-DK5ES must be connected to the eSata host adapter that supports Port Multiplier.
A: Ratoc SA-DK5ES is an old SATA II ( 3.0 Gbps、1.5 Gbps) box which is most likely using Silicon Image. Our eS3U31 does not support this chipset
Q: I also bought the eS3U31 via Amazon. I have four Sil3726-based PM enclosures. The Sil3726 IS on the list of supported PMs on the product page. The eS3U31 does not negotiate a link with any drives in the enclosure. The light for drive 1 flashes several times
A: Sorry for the mistake on our website. This new adapter ONLY supports JMicron chipset. Web page already corrected
Q: How can one flash a defective unit when you only have a Mac to flash it with and a JBOD?
A: To flash you must use Windows
Q: I bought the eS3U31 product from Amazon. My drive is not being detected. I'm using a Sonnet Fusion D500p enclosure with 5x WD2002FYPS 2 TB drives. I tried restarting my laptop and made sure all drives seated properly, but that didn't seem to work.
A: Currently, our adapter only supports JMicron chipset
Q: Trying to hook this up to a Sans Digital TR5M+bnc w/ 2 WD Red Pro drives and a Mac Mini [Loaded] - no luck. Also on PC or MacBook Pro - no luck... Does latest USB just not load or is unit pooched/DOA? Not shown in USB panels as a device or anything...
A: Til now our adapter only supports PM mode with JMicron chipset