USB3.0 To SATA3 (6Gb) Bridge Board Direct Connect

USB3.0 To SATA3 (6Gb) Bridge Board Direct Connect

Thunderbolt 3 Four Bay Short 1U Rackmount SSD* | SATA | SAS (12 Gb/S) HW RAID, Rails Included

Write Block Tray-Less Four SATA III To USB3.0 Support UASP Enclosure For MAC, Windows, Linux

USB3.0 To SATA3 (6Gb) Write-Block Bridge Board Panel-Mount

USB3.0 To SATA3 (6Gb) Write-Block Bridge Board Panel-Mount

USB3.0 To SATA3 (6Gb) Bridge Board Direct Connect

Read existing data on SATA drive at USB3.0 speed (5.0Gb) with Write Block device. A perfect device for forensic U3-SATA3-RO purposes.
$29.95
Availability: In stock
SKU
U3-SATA3-RO-1

U3-SATA3-RO - Key Features

  • Supports USB Super-Speed/High-Speed/Full-Speed - 5.0Gb/480Mb/12Mb/s respectively
  • Bus power bridge, no extra power input required
  • Support over 2.0TB volume capacity - 3TB HDD tested
  • Panel mount fit to SCSI cut out
  • Feature Read only mode - Write-block

U3-SATA3-RO is a USB3.0 to SATA III (6Gb/s - SATAI/II compatible) bridge board that allows end users to convert ANY SATA drive such as: SSD, DVD, DVD-RAM, MO, CD-ROM, CD-RW, Hard Disk to a SuperSpeed 5.0Gb USB3.0 (USB2.0/1.1 compatible) device.


U3-SATA3-RO translates the communication protocol between SATA III (6Gb/s - SATAI/II compatible) and SuperSpeed USB commands. Fully compliant with USB3.0 Specification Rev 1.0 and USB Mass Storage Class Bulk-Only Transport Specification.


U3-SATA3-RO provides the perfect solution for data backup and transferring of data between computers using SATA drives, Raid volume, BD, and DVD.


U3-SATA3-RO, SPM39x hardware Raid controller, and system integrator can build a high performance USB3.0 hardware Raid system.


For OEM or bulk quantity pricing, please contact sales@DATOptic.com.

Write Your Own Review
You're reviewing:USB3.0 To SATA3 (6Gb) Bridge Board Direct Connect
Your Rating
Part Number <bu3-sata3-ro< b="">Panel mount USB3.0 to SATA 3 (6Gb/s - SATAI/II compatible) bridge board
Peripherals One SATA host connection drive 
Fully support all size SATA HDD including 1.0TB, 1.5TB, 2.0 and 3.0TB
Operating System Support any OS support USB drive - Driverless
Drive Interface SATAI, SATA II, SATAIII
Host Interface USB3.0 fully compatible USB2.0, USB1.1/1.0
Operating Temperature 0o C to 50o C
Operating Humidity 5% to 95% non-condensing
Dimensions 61.5(D) x 21.6(H) x 83.3(W)mm
Mountable in SCSI cut out
Connectors USB3.0 connector x 1 (device)
SATA connector x 1 (host)
Bus powered
Power Requirement 5V/DC; 80ma ~ 200mA
Frequently Asked Questions Q: A: