Firewire 400 800 JBOD to 4 IDE drives

USB3.0 To SATA3 (6Gb) Bridge Board - U3-SATA312-7

Firewire 400 800 JBOD to 4 IDE drives

USB3.0 To SATA3 (6Gb) Bridge Board Pane-Mount

Firewire 400 800 JBOD to 4 IDE drives

USB3.1 To ESATA (6Gb) Adapter Support Port Multiplier - New (Patent Pending)

USB3.0 To SATA3 (6Gb) Bridge Board - U3-SATA312-7

U3-SATA312 is a USB 3.0 to SATA IlI (6Gb/s) Bridge Board. Using to convert an existing or new SATA device with our SuperSpeed USB3.0 (USB2.0/1.1 compatible) bridge U3-SATA312-7

$32.95
Availability: In stock
SKU
U3-SATA312

U3-SATA312-7 - Key Features

  • Supports USB SuperSpeed/High Speed/Full Speed - 5.0Gb/480Mb/12Mb/s respectively
  • Bus power bridge, no extra power input required
  • Support over 2.0TB volume capacity - 3TB HDD tested
  • Panel mount fit to SCSI cut out
  • Feature Read-only mode - Write-block

U3-SATA312-7 is a USB3.0 to SATA III (6Gb/s - SATAI/II compatible) bridge board that allows end users to convert ANY SATA drive such as SSD, DVD, DVD-RAM, MO, CD-ROM, CD-RW, Hard Disk to a SuperSpeed 5.0Gb USB3.0 (USB2.0/1.1 compatible) drive.


U3-SATA312-7 translates the communication protocol between SATA III (6Gb/s - SATAI/II compatible) and SuperSpeed USB commands. Fully compliant with USB3.0 Specification Rev 1.0 and USB Mass Storage Class Bulk-Only Transport Specification.


U3-SATA312-70 provides the perfect solution for data backup and transferring of data between computers using SATA drives, Raid volume, BD, and DVD.


U3-SATA312-7, SPM39x hardware RAID controller and system integrator can build a high-performance USB3.0 hardware Raid system.


For OEM or bulk quantity pricing, please contact sales@DATOptic.com.

Write Your Own Review
You're reviewing:USB3.0 To SATA3 (6Gb) Bridge Board - U3-SATA312-7
Your Rating
Part Number U3-SATA312-7 
Panel mount USB3.0 to SATA 3 (6Gb/s - SATAI/II compatible) bridge board
Peripherals One SATA host connection drive 
Fully support all size SATA HDD including 1.0TB, 1.5TB, 2.0 and 3.0TB
Operating System Support any OS support USB drive - Driverless
Drive Interface SATAI, SATA II, SATAIII
Host Interface USB3.0 fully compatible USB2.0, USB1.1/1.0
Operating Temperature 0o C to 50o C
Operating Humidity 5% to 95% non-condensing
Dimensions 61.5(D) x 21.6(H) x 83.3(W)mm
Mount-able in SCSI cut out
Connectors USB3.0 connector x 1 (device)
SATA connector x 1 (host)
Bus powered
Power Requirement 5V/DC; 80ma ~ 200mA
Frequently Asked Questions Q: A: