Firewire 400 800 JBOD to 4 IDE drives

USB3.0 To SATA3 (6Gb) Write-Block Bridge Board Panel-Mount

Firewire 400 800 JBOD to 4 IDE drives

USB3.1 To ESATA (6Gb) Adapter Support Port Multiplier - New (Patent Pending)

Firewire 400 800 JBOD to 4 IDE drives

USB 2.0 To SATA Bridge Board

USB3.0 To SATA3 (6Gb) Write-Block Bridge Board Panel-Mount

READ ONLY (Write block) ANY existing SATA drive with our new USB3.0 device at (5.0Gb) SuperSpeed USB3.0 (USB2.0/1.1 compatible) bridge U3-SATA-WB.

$34.95
Availability: In stock
SKU
U3-SATA3-WB

U3-SATA3-WB - Key Features

  • Supports USB Super-Speed/High-Speed/Full-Speed - 5.0Gb/480Mb/12Mb/s respectively
  • Bus power bridge, no extra power input required
  • Supports over 2.0TB volume capacity - 3TB HDD tested
  • Panel mount fit to SCSI cut out
  • Features Read-only mode - Write-block

U3-SATA3-WB is a USB3.0 to SATA III (6Gb/s - SATAI/II compatible) bridge board that allows end users to convert ANY SATA drive such as SSD, DVD, DVD-RAM, MO, CD-ROM, CD-RW, Hard Disk to a (SuperSpeed 5.0Gb) USB3.0 (USB2.0/1.1 compatible) device.


U3-SATA3-WB translates the communication protocol between SATA III (6Gb/s - SATAI/II compatible) and SuperSpeed USB commands. Fully compliant with USB3.0 Specification Rev 1.0 and USB Mass Storage Class Bulk-Only Transport Specification.


U3-SATA3-WB provides the perfect solution for data backup and transferring of data between computers using SATA drives, RAID volume, BD, and DVD.


U3-SATA3-WB with SPM39x hardware RAID controller and system integrator can build a high-performance USB3.0 hardware RAID system.

For OEM or bulk quantity pricing, please contact sales@DATOptic.com.

Write Your Own Review
You're reviewing:USB3.0 To SATA3 (6Gb) Write-Block Bridge Board Panel-Mount
Your Rating
Part Number U3-SATA310 
Panel mount USB3.0 to SATA 3 (6Gb/s - SATAI/II compatible) bridge board
Peripherals One SATA host connection drive 
Fully support all size SATA HDD including 1.0TB, 1.5TB, 2.0 and 3.0TB
Operating System Support any OS support USB drive - Driverless
Drive Interface SATAI, SATA II, SATAIII
Host Interface USB3.0 fully compatible USB2.0, USB1.1/1.0
Operating Temperature 0o C to 50o C
Operating Humidity 5% to 95% non-condensing
Dimensions 61.5(D) x 21.6(H) x 83.3(W)mm
Mount-able in SCSI cut out
Connectors USB3.0 connector x 1 (device)
SATA connector x 1 (host)
Bus powered
Power Requirement 5V/DC; 80ma ~ 200mA
Frequently Asked Questions Q: Does it support 5 SATA port multiplier with JMB321, which is very popular on the net? Thank you. 1 answers A: Yes, It does, the chipset we used is JMicron Q: Are you working on firmware to support silicon image? I would love to be able to use your product! 1 answers A: Unfortunately, Silicon Image is longer exist, therefore we can not get any data, or support to make this compatible with our adapter. Sorry there is no other way Q: Connecting Ratoc SA-DK5ES multi HD tower with Mac Book Pro 15" 2016 with High Sierra OS. Ratoc Support wrote: SA-DK5ES must be connected to the eSata host adapter that supports Port Multiplier. 1 answers A: Ratoc SA-DK5ES is an old SATA II ( 3.0 Gbps、1.5 Gbps) box which is most likely using Silicon Image. Our eS3U31 does not support this chipset Q: I also bought the eS3U31 via Amazon. I have four Sil3726-based PM enclosures. The Sil3726 IS on the list of supported PMs on the product page. The eS3U31 does not negotiate a link with any drives in the enclosure. The light for drive 1 flashes several times 1 answers A: Sorry for the mistake on our website. This new adapter ONLY supports JMicron chipset. Web page already corrected Q: How can one flash a defective unit when you only have a Mac to flash it with and a JBOD? 1 answers A: To flash you must use Windows Q: I bought the eS3U31 product from Amazon. My drive is not being detected. I'm using a Sonnet Fusion D500p enclosure with 5x WD2002FYPS 2 TB drives. I tried restarting my laptop and made sure all drives seated properly, but that didn't seem to work. 1 answers A: Currently, our adapter only supports JMicron chipset Q: Trying to hook this up to a Sans Digital TR5M+bnc w/ 2 WD Red Pro drives and a Mac Mini [Loaded] - no luck. Also on PC or MacBook Pro - no luck... Does latest USB just not load or is unit pooched/DOA? Not shown in USB panels as a device or anything... A: Til now our adapter only supports PM mode with JMicron chipset