USB3.0 To SATA3 (6Gb) Write-Block Bridge Board Panel-Mount

USB3.0 To SATA3 (6Gb) Write-Block Bridge Board Panel-Mount

USB3.0 To SATA3 (6Gb) Bridge Board Direct Connect

USB3.0 To SATA3 (6Gb) Bridge Board Direct Connect

USB 3.1 To SATAIII (6Gb) Direct Connect Support UASP, MAC, Windows And Linux

USB 3.1 To SATAIII (6Gb) Direct Connect Support UASP, MAC, Windows And Linux

USB3.0 To SATA3 (6Gb) Write-Block Bridge Board Panel-Mount

READ ONLY (Write block) ANY existing SATA drive with our new USB3.0 device at (5.0Gb) SuperSpeed USB3.0 (USB2.0/1.1 compatible) bridge U3-SATA-WB.

$34.95
Availability: In stock
SKU
U3-SATA3-WB-1
U3-SATA3-WB - Key Features Supports USB Super-Speed/High-Speed/Full-Speed - 5.0Gb/480Mb/12Mb/s respectively Bus power bridge, no extra power input required Supports over 2.0TB volume capacity - 3TB HDD tested Panel mount fit to SCSI cut out Features Read only mode - Write-block U3-SATA3-WB is a USB3.0 to SATA III (6Gb/s - SATAI/II compatible) bridge board that allows end users to convert ANY SATA drive such as: SSD, DVD, DVD-RAM, MO, CD-ROM, CD-RW, Hard Disk to a (SuperSpeed 5.0Gb) USB3.0 (USB2.0/1.1 compatible) device. U3-SATA3-WB translates the communication protocol between SATA III (6Gb/s - SATAI/II compatible) and SuperSpeed USB commands. Fully compliant with USB3.0 Specification Rev 1.0 and USB Mass Storage Class Bulk-Only Transport Specification. U3-SATA3-WB provides the perfect solution for data backup and transferring of data between computers using SATA drives, RAID volume, BD, and DVD. U3-SATA3-WB with SPM39x hardware RAID controller, and system integrator can build a high performance USB3.0 hardware RAID system. For OEM or bulk quantity pricing, please contact sales@DATOptic.com.
Write Your Own Review
You're reviewing:USB3.0 To SATA3 (6Gb) Write-Block Bridge Board Panel-Mount
Your Rating
Part Number U3-SATA310 Panel mount USB3.0 to SATA 3 (6Gb/s - SATAI/II compatible) bridge board Peripherals One SATA host connection drive Fully support all size SATA HDD including 1.0TB, 1.5TB, 2.0 and 3.0TB Operating System Support any OS support USB drive - Driverless Drive Interface SATAI, SATA II, SATAIII Host Interface USB3.0 fully compatible USB2.0, USB1.1/1.0 Operating Temperature 0o C to 50o C Operating Humidity 5% to 95% non-condensing Dimensions 61.5(D) x 21.6(H) x 83.3(W)mm Mount-able in SCSI cut out Connectors USB3.0 connector x 1 (device) SATA connector x 1 (host) Bus powered Power Requirement 5V/DC; 80ma ~ 200mA
Frequently Asked Questions Q: A: